TITEBOND ORIGINAL WOOD GLUE


Titebond Original Wood Glue is the industry standard for woodworking. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes. Titebond Original can help any woodworker achieve professional-looking...

more

Watch Video

Features & Benefits

check_circle
Fast set - Shortens clamp time
check_circle
Bonds stronger than wood
check_circle
Solvent-resistant
check_circle
Excellent sandability
check_circle
Unaffected by finishes
check_circle
Easy cleanup with water
check_circle
FDA approved for indirect food contact

Application Guidelines

Application Temperature:
Above 50°F.
Open Assembly Time:
4-6 minutes (70°F./50%RH)
Total Assembly Time:
10-15 minutes (70°F./50%RH)
Minimum Required Spread :
Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure:
Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application:
Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup:
Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations:
Titebond Original Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Physical Properties

Type
Aliphatic resin emulsion
Calculated VOC
10.7 g/L
State
Liquid
Weight Per Gallon
9.2 lbs.
Color
Yellow
Dried Film
Translucent
Flashpoint
> 200°F.
Solids
46%
Freeze/thaw Stability
Stable
Viscosity
3,200 cps
pH
4.0
Chalk Temperature
To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life
24 months in tightly closed containers at 75°F.

Bond Strength ASTM D-905 (On Hard Maple)

Temperature Strength Wood Failure
Room Temperature 3,650 psi 68%
150°F. Overnight 1,250 psi 1%


SPECIFICATIONS

  • CONFORMS TO ASTM D-4236

Caution Statement

CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.