GREENCHOICE ACOUSTICAL CEILING TILE CONSTRUCTION ADHESIVE


Titebond GREENchoice Acoustical Ceiling Tile Construction Adhesive is designed for the safe and easy installation of acoustical ceiling tiles. Its fast, strong grab holds materials firmly in place and eliminates potential sagging. This VOC-compliant, nonflammable formula is environmentally safe – emitting no harmful fumes and promot...

more

Features & Benefits

check_circle
Recommended For: Installing ceiling tiles over many common porous surfaces
check_circle
Compatible Materials: Acoustical ceiling tiles to many building materials including: painted and unpainted drywall, gypsum wallboard, concrete, hardboard, plywood and wood.
check_circle
Safe and easy installation
check_circle
Water-based
check_circle
For use on acoustical ceiling tiles
check_circle
Fast grab - excellent adhesion
check_circle
Nonflammable
check_circle
No offensive odor
check_circle
Water cleanup while wet
check_circle
No sag installation
check_circle
Passes ASTM D-1779 specification
check_circle
Environmentally safe
check_circle
VOC-compliant
check_circle
NFPA Class A fire rating when tested in accordance with ASTM E-84

Application Guidelines

Application Temperature:
Over 50°F for adhesive and substrates
Service Temperature Range:
0°F to 120°F
Working Time:
15 minutes
Method of Application:
Mason’s trowel
Prep:
Surfaces must be dry and free from any material that may deter adhesion.
Application:
Let adhesive and materials acclimate to room temperature 24 hours before installing. Note: Do not use when temperature, adhesive or materials are below 50°F. Using the “butter” method, spread a thin layer of adhesive to cover a large area of each corner of tile. Then apply adhesive in 1” to 1 ½” mounds (golf ball size). Place mounds 2“ to 3” in from the corners on the back of the tile. Immediately press tile into position, working the tile back and forth ½” to flatten the mound of adhesive. Adhesive should be flattened to a mound ³/16” thick and 2 ½” in diameter. When installing interlocking tile, do not slide tile into groove of adjacent tile until it has been pressed against the ceiling to its proper level.
Cleanup:
Tools and excess adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesive may be cleaned with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
Limitations:
For tiles larger than 12” x 12”, place a 1” to 1 ½” mound (golf ball size) of adhesive on each square foot corner. Please contact Technical Service at 1.800.347.4583 for questions concerning the amount of adhesive needed per panel. For best results, store Titebond GREENchoice Acoustical Ceiling Tile Adhesive above 50°F.

Physical Properties

Type
Polymer emulsion
State
Medium-viscosity mastic
Color
Beige
Solids
70%
Viscosity
200,000 cps
pH
5.0
VOC
<50 g/L
Weight Per Gallon
11.9 lbs.
Flashpoint
> 200°F
Freeze/thaw Stability
Stable
Storage Life
More than 2 years in unopened container
Odor
Mild

Coverage

Approximately 50-60 sq. ft. of ceiling tile per gallon.


Specifications & Certifications

  • Passes the performance specifications of ASTM D1779* and Section 01350 under CHPS Criteria, IEQ Credit 2: Low-Emitting Materials.
  • Exceeds the performance requirements of ASTM C557 and has been tested in accordance with ASTM E72 for racking and shearing.
  • This product has a NFPA Class A fire rating when tested in accordance with ASTM E-84 and meets LEED v4, SCAQMD, CARB and NAHB Green Building specifications.
  • Passes California Department of Public Health CDPH/EHLB/Standard Method version 1.1, 2010

*For ceiling panel weight restrictions, please call our Help Line at 1.800.877.4583.