INSTANT BOND WOOD ADHESIVE GEL


Titebond Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective...

more

Watch Video

Features & Benefits

check_circle
Fast set - Eliminates clamping or reduces clamp time
check_circle
Bonds stronger than wood
check_circle
Excellent heat and solvent-resistance
check_circle
Unaffected by finishes
check_circle
Versatile - Bonds wood, MDF, acrylic, granite, natural rubber, PVC and more
check_circle
2 year shelf life
check_circle
Triple distilled for purity & consistency
check_circle
Impact-resistant
check_circle
No-clog applicator for easy use and waste reduction
check_circle
Ideal for bonding miter joints on MDF and porous woods
check_circle
Excellent for filling large gaps
check_circle
High viscosity allows time for positioning parts
check_circle
MIL Spec (A46050C) Type II, Class 2

Application Guidelines

Application Temperature:
Above 50°F.
Cure Speed:
30 second handling, 20 second set, 60 second cure. *Full cure in 8 hours.
Service Temperature Range:
-65° to 200° F.
Cleanup:
Use acetone. Follow solvent vendor’s precautions.
Limitations:
Titebond Instant Bond Gel Wood Adhesive is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times may be affected by environmental conditions. For best results, apply adhesive between 55°F and 85°F. KEEP FROM FREEZING.

Physical Properties

Type
Ethyl cyanoacrylate
Reactive VOC
20 g/L
State
Liquid
Weight Per Gallon
9.18 lbs.
Color
Clear
Flashpoint
> 178° F.
Dried Film
Translucent
Freeze/thaw Stability
Stable
Solids
100%
Specific Gravity
1.1
Viscosity
60,000 cps
Storage Life
2 yrs in tightly closed bottles stored between 40° & 75°F

BOND STRENGTH ASTM D-1002

Temperature Shear Strength psi
Room Temperature Between 2800 and 4200 psi depending on substrate tested

Caution Statement

DANGER: COMBUSTIBLE LIQUID. Bonds skin, eye and other tissue instantly. Contains ethyl-2-cyanoacrylate. Irritating to eyes, skin and respiratory tract. Do not allow eye or skin contact. Avoid breathing vapors. Do not swallow. Keep away from sources of heat. FIRST AID: For eye contact, do not force eyes open. Flush eyes with water for 15 minutes and seek medical attention immediately. For skin contact, flush contact area with water and seek medical attention. If inhaled, remove to fresh air. Seek medical assistance if symptoms persist. Refer to Safety Data Sheet for additional information. KEEP OUT OF THE REACH OF CHILDREN.