TITEBOND DOWELING GLUE


Titebond Doweling Glue is specifically designed for use with automatic doweling equipment. Its low viscosity (1500 cps.) allows the appropriate flow through feed lines and injectors of most U.S.-made doweling machinery. Titebond Doweling sets fast to reduce assembly time, offers excellent strength and provides a translucent glue lin...

more

Features & Benefits

check_circle
For use with American-made doweling equipment
check_circle
Excellent strength
check_circle
Fast setting
check_circle
Low viscosity for better flow
check_circle
Dries translucent

Application Guidelines

Application Temperature:
Above 50°F.
Assembly Time After Glue Application:
0-5 minutes (70°F./50% RH)
Method of Application:
Compatible with most U.S.-made doweling machines. See your machine’s manual for details.
Cleanup:
Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations:
Titebond Doweling Glue is specifically designed for use with American-made doweling equipment. Because of its low viscosity it is not well suited for other assembly applications. This product may be used as supplied or diluted with water by as much as 5% to improve flow. Not recommended for exterior use or where moisture is likely. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.

Physical Properties

Type
Polyvinyl acetate emulsion
Type
Polyvinyl acetate emulsion
Calculated VOC
10.2 g/L
State
Liquid
Weight Per Gallon
9.1 lbs.
Color
White
Dried Film
Translucent
Flashpoint
> 200°F.
Solids
51%
Freeze/thaw Stability
Stable
Viscosity
1,500 cps
pH
4.5
Chalk Temperature
To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life
12 months in tightly closed containers at 70°F.

Bond Strength ASTM D-905 (On Hard Maple)

Temperature Strength Wood Failure
Room Temperature 3,650 psi 68%
150°F. Overnight 1,250 psi 1%

Caution Statement

CAUTION: EYE AND SKIN IRRITANT. Contains oxydipropyl dibenzoate. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.