Features & Benefits

---

• Recommended For: Installation of drywall and paneling to most common building materials, as well as general construction, installation and repair projects.
• Compatible Materials: Common building materials, including wood, metal, gypsum wallboard, plywood, hardboard, tile board, plaster, wallpaper (non-vinyl) and most other porous materials.
• Polyurethane foam
• Reduces nail pops
• Adjustable, easy to control bead
• High yield - Covers up to 30 panels*
• No sag installation
• Durable, waterproof bond

Application Guidelines

---

• Application Temperature: 40°F to 100°F. Approved for use at outside temperature of 0°F while maintaining a chemical and can temperature between 40°F and 115°F.
• Service Temperature Range: -20°F to 250°F
• Working Time: Approximately 10-20 minutes.
• Prep: Product is extremely flammable during dispensing. Read cautions carefully. Surfaces must be clean and free of any material that may prevent adequate adhesion. Wear protective glasses or goggles, nitrile gloves and clothing that protects against dermal exposure. Use only in a well-ventilated area.
• Application: Screw can onto gun coupling until it will go no further. DO NOT OVERTIGHTEN. Grip can and gun with both hands and shake vigorously for 30-60 seconds. Adjust bead with gun regulator screw to produce between 1/4’’ to 1/2’’ bead. Apply continuous bead of adhesive to studs or furring strips. Where two panels join, apply a zigzag bead so adhesive will contact both panels. Adhere materials within 10-20 minutes based on environmental conditions. Press surfaces firmly together for full contact with adhesive. Note: For drywall, use fasteners in accordance with local building standards. For paneling or other large applications, use finishing nails at top and bottom, and brace overnight as needed. When applying adhesive overhead for ceiling applications, use 3/8’’ bead or less.
• Cleanup: Uncured adhesive may be removed with Titebond Foam Cleaner. If dried, removal will require scraping or other mechanical means.
• Storage: To store for short periods of time, close gun regulator screw completely to secure trigger. Can MUST remain fastened to gun during storage. Store upright in a dry area and use remainder of can within 30 days. If can is removed, replace with cleaner or another adhesive can immediately and spray enough cleaner or adhesive to remove any air that entered the gun. Failure to remove this air will cause residual adhesive in the gun to cure and can lead to gun failure.

Physical Properties

---

• Type: One-component, polyurethane foam
• State: Liquid (aerosol)
• Color: Off-white
• Solids: 83%
• VOC: <200 g/L
• Flashpoint: < 0°F
• Freeze / Thaw Stability: Will not freeze
• Storage Life: 18 months in tightly closed containers at 75°F
• Odor: Low

Limitations

---

IT IS EXTREMELY IMPORTANT THAT CONTENTS ARE MIXED THOROUGHLY. AT TEMPERATURES BELOW 65°F, DOUBLE SHAKING TIMES. If can temperature falls below 40°F, gradually bring the can back to room temperature before shaking, prior to application. Not designed for continuous submersion. When using on non-porous substrates, mist with water to speed curing.

Product SKUs

---

Part Number	UPC	Case UPC	Size	Weight	Units Per Package	Packages Per Pallet
8572	037083085723	10037083085720	24 Oz. Can	24.00	12	48

---

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

---

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com