TITEBOND KITCHEN & BATH SEALANT


Titebond® Kitchen & Bath Sealant is a modified acrylic formula specifically designed to permanently seal high-moisture areas found in kitchens and baths. It is ideal for sealing around tubs, showers, sinks and countertops and offers excellent adhesion to many common materials including vinyl, ceramic tile, aluminum, g...

more

Features & Benefits

check_circle
For use on tubs, showers, sinks, and countertops
check_circle
Exceptional water and mildew resistance
check_circle
Excellent adhesion & superior flexibility
check_circle
Once cured, will not shrink or discolor over time
check_circle
Stain and dirt resistant

Application Guidelines

Application Temperature:
Above 40°F. and below 120°F.
Service Temperature Range:
0°F. to 160°F.
Method of Application:
Cartridge/caulking gun
Working Time:
Approximately 15 minutes for a 1/4" bead
Working Surfaces:
Surfaces to be caulked should be cleaned down to the original substrate, dry and free from excessive oil, grease, water, dirt or any other material that may deter adhesion.
Cleanup:
Clean excess material with a damp cloth. Clean hands and tools with soap and water.
Coverage:
Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.
Limitations:
Do not apply if rain is expected within 12 hours. Air, sealant and surface temperature should be above 40°F. Allow to dry at least 24 hours before exposing to water. Not designed for continuous submersion or use below the waterline. For questions, please call our toll free Help Line at 1-800-347-4583. NOTE: Titebond Kitchen & Bath Clear (1711) will be white during application but will clear within 7-14 days, depending on temperature, humidity and bead size.

Physical Properties

Type
Modified Acrylic
Non-reactive VOC
20g/L (<1.5%) white & almond, 5g/L (< 0.8%) clear
Color
White, almond and clear
Weight Per Gallon
11.23 lbs. white and almond, 8.8 lbs. clear
Solids
72% white & almond, 60% clear
Flashpoint
Not Applicable (water-based)
Freeze/thaw Stability
Stable
Viscosity
250,000 cps
Storage Life
24 months in tightly closed containers between 50°F to 80°F.

SPECIFICATIONS

  • ASTM C834, TYPE OP, GRADE 0°C, TYPE C
  • FDA 21-CFR-177.2600

Caution Statement

White:
WARNING: EYE, SKIN AND RESPIRATORY IRRITANT.
Contains limestone, titanium dioxide, ethylene glycol. Harmful if swallowed. Long term exposure to ingredients in this product can increase the risk of certain cancers. Adverse reproductive effects have been reported in animals. Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Wear appropriate personal protective equipment. First Aid: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15-30 minutes; contact physician. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.

Clear:
WARNING: EYE, SKIN AND RESPIRATORY IRRITANT.
Contains ethylene glycol. Long term exposure to ingredients in this product can increase the risk of certain cancers. Adverse reproductive effects have been reported in animals. Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Wear appropriate personal protective equipment. First Aid: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15-30 minutes; contact physician. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.