TITEBOND PAINTER'S CAULK


Titebond Painter's Caulk is an interior use, latex caulk that repairs cracks in plaster/drywall and fills gaps around wood trim, moldings, mantels and baseboards. It is de-aired for a smooth, uniform bead that extrudes and tools easily leaving no residual odor behind. It is a mildew resistant formula that contains no plasticizers or...

more

Features & Benefits

check_circle
IDEAL FOR: Sealing joints, repairing cracks and filling gaps for interior applications.
check_circle
SEALS: Wood, metal, glass, masonry, aluminum, brick and most common building materials.
check_circle
Paints & stains easily
check_circle
Dries quickly & provides a watertight seal
check_circle
Pre-paint preparation
check_circle
Minimal odor
check_circle
De-aired for a smoother bead
check_circle
Mildew resistant

Application Guidelines

Application Temperature:
Above 40°F (4°C)
Service Temperature Range:
-25°F to 180°F (-31°C to 82°C)
Method of Application:
Cartridge/caulking gun
Working Time:
Approximately 10-15 minutes for 1/4” bead
Application Directions:
1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2" in width. 2. Cut tip at 45° angle for 1/8" to 1/2" bead and place in cartridge gun. 3. Force caulk into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
Painting:
The caulk should be dry to the touch and ready to paint in 2-4 hours.
Cleanup:
Clean uncured material with water. After curing, excess caulk must be cut or scraped away.
Coverage:
Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.
Limitations:
Not designed for continuous submersion or use below the waterline. Air, caulk and surface temperature should be above 40°F. Cure time is dependent upon ambient conditions including temperature and humidity. The caulk should be dry to the touch and ready to paint in 2-4 hours. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.

Physical Properties

Type
Latex
Calculated VOC
<50 g/L (<1.5%)
Color
White
Weight Per Gallon
13.5 lbs.
Solids
82%
Flashpoint
None
Viscosity
600,000 cps
Freeze / Thaw Stability
Stable
Storage Life
24 months in a dry location at or below 75°F.

SPECIFICATIONS

Exceeds:
  • ASTM C834 TYPE OP GRADE -18°C

Warranty Statement

25 Year Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Liability is limited to product replacement only.