TITEBOND NO-RUN, NO-DRIP WOOD GLUE


Titebond No-Run, No-Drip Wood Glue is the thickest, fastest-drying glue available for use with porous and semi-porous materials. It is ideal for finish trim, crown molding, baseboards, window casings and other applications requiring a professional-strength, no-run wood glue. Titebond No-Run, No-Drip provides a strong initial tack an...

more

Features & Benefits

check_circle
Thick - No-runs, No-drips
check_circle
Versatile - Bonds most porous and semi-porous materials
check_circle
Fill small cracks and gaps
check_circle
Strong initial tack - Fast set
check_circle
Unaffected by finishes
check_circle
Excellent sandability
check_circle
Good heat resistance
check_circle
Nonflammable - No offensive odor

Application Guidelines

Application Temperature:
Above 50°F.
Open Assembly Time:
3-5 minutes (70°F./50%RH)
Total Assembly Time:
10-15 minutes (70°F./50%RH)
Minimum Required Spread :
Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure:
Enough to bring joints tightly together (generally, 100-150 psi for softwoods,125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application:
Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup:
Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations:
Titebond No-Run, No-Drip Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Physical Properties

Type
Thixotropic polyvinyl acetate
Calculated VOC
2.4 g/L
State
High-viscosity liquid
Weight Per Gallon
9.0 lbs.
Color
Beige
Dried Film
Translucent
Flashpoint
> 200°F.
Solids
60%
Freeze/thaw Stability
Stable up to 2 cycles
Viscosity
36,500 cps
pH
4.8
Chalk Temperature
To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life
24 months in tightly closed containers at 75°F.

Bond Strength ASTM D-905 (On Hard Maple)

Temperature Strength Wood Failure
Room Temperature 3,000 psi 7%
150°F. Overnight 650 psi 0%


SPECIFICATIONS

  • CONFORMS TO ASTM D-4236