TITEBOND POLYURETHANE GLUE


Titebond Polyurethane Glue is a breakthrough in adhesive technology. It is the only polyurethane glue to combine a long 30-minute working time with a short 45-minute clamp time*. It is a versatile, professional-strength glue specifically formulated for multi-purpose applications. In addition to its superior wood-to-wood performance,...

more

Watch Video

Features & Benefits

check_circle
100% waterproof (Passes ANSI Type I & II water-resistance testing)
check_circle
Bonds virtually everything
check_circle
Epoxy-like strength - No mixing
check_circle
Short clamp & fast cure
check_circle
Excellent sandability
check_circle
100% solids
check_circle
Solvent free

Application Guidelines

Application Temperature:
Above 50°F.
Assembly Time After Glue Application:
25-30 minutes (70°F./50%RH)
Minimum Required Spread :
Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure:
Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).
Method of Application:
Easily spread with a roller, spreader or brush. *NOTE: This product cures by reaction with moisture. Changes in humidity, temperature and moisture content of the glued surfaces will affect open time and minimum clamp time. Maximum open time can be determined by excessive foam development in the adhesive. Minimum clamp time can be determined when squeeze out of adhesive becomes firm.
Cleanup:
Mineral spirits while glue is wet. Scrape or sand off dried excess.
Limitations:
Titebond Polyurethane Glue is not for structural applications or for use below the waterline. For ease of application, the glue, temperature and materials to be bonded should be above 50°F. Lower temperatures will cause the glue to thicken.

Physical Properties

Type
Polyurethane
Calculated VOC
0 g/L
State
Liquid
Weight Per Gallon
9.55 lbs.
Color
Brown
Flashpoint
> 200°F.
Dried Film
Yellow
Freeze/thaw Stability
Stable
Solids
100%
Viscosity
8,500 cps
Storage Life
12 months in tightly closed containers at 75°F.

Bond Strength ASTM D-905 (On Hard Maple)

Temperature Strength Wood Failure
Room Temperature 3,500+ psi 60%
150°F. Overnight 3,000 psi 50%


SPECIFICATIONS

  • CONFORMS TO ASTM D-4236

Caution Statement

WARNING: EYE AND SKIN IRRITANT. POTENTIAL SKIN AND RESPIRATORY SENSITIZER. Contains isocyanate containing polymers. Contact causes eye irritation. Prolonged or repeated skin exposure may cause irritation and sensitization or allergic reaction. Contact may stain skin. Do not allow eye contact. Avoid prolonged or repeated contact with skin. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and seek medical attention. For skin, wash thoroughly with soap and water. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.