Titebond on Instagram Titebond on Facebook Titebond on YouTube MSDS
Loading

Titebond Cold Press Veneer


Titebond Cold Press for Veneer is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. Titebond Cold Press offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers.

  • Economical alternative to contact cement

  • Formulated to minimize "bleed-through"

  • Moderate speed of set

  • No harmful vapors

  • Safe - nonflammable

Type: Modified PVA emulsion Calculated VOC: 2.0 g/L State : Liquid Weight Per Gallon : 9.2 lbs. Color : Tan Chalk Temperature: Approximately 50°F. Dried Film: Dark Brown Flashpoint : >200°F. Solids : 42% Freeze/thaw Stability : Stable Viscosity : 4,500 cps pH : 4.9 Storage Life : 12 months in tightly closed containers at 70°F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)
  Temperature Strength Wood Failure
  Room Temperature 2,508 psi 6%
  150°F. Overnight 656 psi 0%


Application Temperature

Above 50°F.


Open Assembly Time

15 minutes (70°F./50% RH)


Total Assembly Time

15-20 minutes (70°F./50%RH)


Minimum Required Spread

Approximately 6 mils or 250 square feet per gallon


Required Pressure Application

100-250 psi, depending on substrates


Method of Application

For most consistent coverage a mechanical spreader is recommended.


Cleanup

Damp cloth while glue is wet. Scrape off and sand dried excess.


Titebond Cold Press for Veneer is specifically designed for veneering and is not suited for other types of assembly applications. Not recommended for exterior use or where moisture is likely. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.
CAUTION: EYE AND SKIN IRRITANT. Contains oxydipropyl dibenzoate. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting, contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
Part No.SizeWeight(lbs.)UPCCase UPCUnits Per PackagePackages Per Pallet
5175Quart Bottle15.6103708305175910037083051756688
5176Gallon Jug19.5703708305176610037083051763263
51775 Gallon Pail49.08037083051773 124
517855 Gallon Drum547.55  14
  • woodworking
  • construction
  • caulk
  • flooring
  • Titebond Woodglues
  • PROVantage
  • WeatherMaster
  • Green Choice
  • Titebond Premium
  • XtremeFoam