- Ideal for plywood, hardboard, gypsum wallboard, some steel and aluminum
- Strong initial tack allows panels to be positioned quickly without slipping
- Resists aging - Will not become hard or brittle
- Exposure to moisture or intermittent cold water has little effect on bond
- Fills irregularities between materials to provide a more solid backup surface
Type: Synthetic elastomeric polymer
Calculated VOC: 365 g/L
State : Thixotropic medium viscosity mastic
Weight/gallon : 11.8 lbs.
Color : Light beige
Flashpoint : 14°F
Solids : 74%
Freeze/thaw stability : Will not freeze
Viscosity : 150,000 cps
Storage life : 12 months in tightly closed containers at 75°F.
Coverage (maximum): Approximate length of bead according to bead diameter
|29 oz. Cartridge
10°F. to 100°F.
Service Temperature Range
0°F. to 120°F.
Method of Application
Approximately 20 minutes for a 1/4" bead
Surfaces to be bonded should be clean, dry and free from excessive oil, grease, water, dirt or any other material that may deter adhesion.
Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor ’s precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
Do not use on polystyrene foam or rigid plastics such as A.B.S. or high-impact polystyrene. Do not use on vinyl-coated drywall. Use Titebond Interior/Exterior Construction Adhesive for bonding polystyrene or rigid plastics. Do not adhere one non-porous material to another since this will slow or prevent drying.
DANGER: EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains methyl acetate, hexane and residual vinyl acetate. Keep away from heat, sparks and flame. Use only with positive cross-ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can cause eye or skin irritation. Prolonged or repeated overexposure to solvents in uncured product can cause central nervous system, peripheral nervous system, eye, skin, liver kidney or respiratory system effects. First Aid: If dizziness or other adverse effects are experienced, move to fresh air; contact physician if discomfort persists. If eye contact occurs, flush eyes with water for 15 minutes; contact physician immediately. If swallowed, do not induce vomiting; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persist.
For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
|Part No.||Size||Weight(lbs.)||UPC||Case UPC||Units Per Package||Packages Per Pallet
|5352||28 Oz. Cartridge||30.85||037083053524||10037083053521||12||44