- Visible under black light
- Enables detection and removal of dried glue before finishing
- Passes ANSI Type II water-resistance
- Versatile - Bonds wood, hardboard, high pressure laminates and particleboard
- Solvent-resistant
- Fast set - Shortens clamp time
- Ideal for radio frequency (R-F) gluing systems
- Easy cleanup with water
Type: Cross-linking polyvinyl acetate
Calculated VOC: 3.0 g/L
State : Liquid
Weight Per Gallon : 9.1 lbs.
Color : Honey cream
Chalk Temperature: * Approximately 55°F.
Dried Film: Translucent, yellow
Flashpoint : > 200°F.
Solids : 48%
Freeze/thaw Stability : Stable
Viscosity : 4,000 cps
pH : 3.0
Storage Life : 24 months in tightly closed containers at 75°F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
Bond Strength ASTM D-905 (On Hard Maple)
| |
Temperature |
Strength |
Wood Failure |
| |
Room Temperature |
3,750 psi |
72% |
| |
150°F. Overnight |
1,750 psi |
6% |
Application Temperature
Above 55°F.
Open Assembly Time
5 minutes (70°F./50%RH)
Total Assembly Time
10-15 minutes (70°F./50%RH)
Minimum Required Spread
Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure
Enough to bring joints tightly together (generally, 100-150 psi
for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application
Easily spread with a roller spreader or brush, or may be transferred
to plastic bottles for finer gluing applications.
Cleanup
Damp cloth while glue is wet. Scrape off and sand dried excess.
Note
For best viewing use a black light with a wavelength of 375 – 400 nm (nanometers).
Titebond II Fluorescent Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 55°F. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exotic or oily woods, such as Ipe and Teak, please contact our Technical Support Team at 1-800-347-4583. Not FDA approved for indirect food contact. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
CAUTION: EYE AND SKIN IRRITANT. Contains aluminum chloride. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
| Part No. | Size | Weight(lbs.) | UPC | Case UPC | Units Per Package | Packages Per Pallet |
| 2316 | Gallon Jug | 19.27 | 037083023169 | 10037083023166 | 2 | 63 |
| 2317 | 5 Gallon Pail | 48.30 | 037083023176 | | 1 | 24 |
| 2318 | 55 Gallon Drum | 512.00 | | | 1 | 4 |