- Environmentally safe - VOC-compliant
- Advanced urethane formula
- Ideal for use on wet, frozen, treated and engineered lumber
- Unmatched strength and durability
- Can be used to bond non-porous materials
- Works in near freezing temperatures
- Safe for plastic or foam
- Fast initial grab - Smooth bead - Fast cure - Minimal shrinkage
- Cartridge and carton contain post-consumer recycled material
Calculated VOC: 20 g/L
State : Mastic
Weight/gallon : 13.4 lbs.
Color : Brown/green
Flashpoint : > 200 °F
Solids : 98%
Freeze/thaw stability : Will not freeze
Viscosity : 100,000 cps.
Storage life : 12 months in unopened container
Coverage (maximum): Approximate length of bead according to bead diameter
|10.5 oz. Cartridge
|29 oz. Cartridge
32 °F. to 120 °F.
Service Temperature Range
-20°F. to 120°F.
Method of Application
Approximately 1 hour - depending on humidity
Surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Apply Titebond Premium Polyurethane Construction Adhesive to only one of the surfaces to be bonded. NOTE: When bonding subfloors or wet, frozen and treated lumber, nail or screw each sheet as recommended by the American Plywood Association.
Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
GREENchoice Premium Polyurethane is not designed for continuous submersion. Adhesive can be difficult to remove from skin and clothing. It is recommended that gloves be worn. When using on non-porous substrates, mist with water to speed curing.
WARNING: EYE AND SKIN IRRITANT. Potential skin and respiratory sensitizer. Contains isocyanates containing polymers. Avoid prolonged or repeated contact with skin or vapors. Do not allow eye contact. Use only with adequate ventilation. First Aid: If skin contact occurs, wash affected area with soap and water. If irritation persists or allergic reactions develop, contact physician. If adverse respiratory affects occur, remove individual to fresh air and contact physician. If eye contact occurs, flush eyes with water for 15 minutes; contact physician. If swallowed, do not induce vomiting; contact physician. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
|Part No.||Size||Weight(lbs.)||UPC||Case UPC||Units Per Package||Packages Per Pallet
|4221||10.5 Oz. Cartridge||15.32||037083042214||10037083042211||12||108
|4222||29 Oz. Cartridge||41.13||037083042221||10037083042228||12||44