- Passes ANSI/HPVA Type I water-resistance
- Waterproof formula that cleans up with water
- Superior strength - Strong initial tack
- Designed for interior and exterior applications
- Longer open assembly time
- Lower application temperature
- Unaffected by finishes
- FDA approved for indirect food contact
Type: Advanced Proprietary Polymer
Calculated VOC: 5.6 g/L
State : Liquid
Weight/gallon : 9.22 lbs
Color : Tan
Chalk temperature: * Approximately 45°F
Dried Film: Light brown
Flashpoint : > 200°F.
Solids : 52%
Freeze/thaw stability : Stable
Viscosity : 4,200 cps
pH : 2.5
Storage life : 24 months in tightly closed containers below 75°F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
Bond Strength ASTM D-905 (On Hard Maple)
| |
Temperature |
Strength |
Wood Failure |
| |
Room Temperature |
4,000 psi |
57% |
| |
150°F Overnight |
800 psi |
0% |
Application Temperature
Above 47°F.
Open assembly time
10 minutes (70°F./50%RH)
Total assembly time
20-25minutes (70°F./50%RH)
Minimum required spread
Approximately 6 mils or 250 square feet per gallon
Required clamping pressure
Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application
Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup
Damp cloth while glue is wet. Scrape off and sand dried excess.
Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 45°F. Store product below 75°F. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exotic or oily woods, such as Ipe and Teak, please contact our Technical Support Team at 1-800-347-4583. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
No caution information is needed. Please refer to the Material Safety Data Sheet for further information.
| Part No. | Size | Weight(lbs.) | UPC | Case UPC | Units Per Package | Packages Per Pallet |
| 1411 | 1.25 Oz. Bottle | 6.27 | 037083014112 | 10037083014119 | 50 | 160 |
| 1412 | 4 Oz. Bottle | 4.17 | 037083014129 | 10037083014126 | 12 | 270 |
| 1413 | 8 Oz. Bottle | 7.97 | 037083014136 | 10037083014133 | 12 | 160 |
| 1414 | 16 Oz. Bottle | 15.30 | 037083014143 | 10037083014140 | 12 | 100 |
| 1415 | Quart Bottle | 15.68 | 037083014150 | 10037083014157 | 6 | 88 |
| 1416 | Gallon Jug | 19.59 | 037083014167 | 10037083014164 | 2 | 63 |
| 1417 | 5 Gallon Pail | 49.12 | 037083014174 | | 1 | 24 |
| 1418 | 55 Gallon Drum | 548.29 | | | 1 | 4 |
| 18000 | 1.25 Oz. Bottle | 4.44 | 037083014112 | 20037083014116 | 30 | 150 |