Titebond Tongue & Groove Glue

Titebond Tongue & Groove Flooring Glue is a premium wood glue that passes the stringent ANSI Type II water resistance test. In addition, it offers a lower chalk temperature and a two-year shelf-life, both of which make it unique to the industry. Titebond Tongue & Groove Flooring Glue is specifically formulated for all types of laminate and floating floors, even over radiant heat systems.

Titebond Tongue & Groove Flooring Glue provides a superior bond at the tongue and groove. Due to its white color, the glue is easy to see for quick cleanup. It is non-toxic and nonflammable, making it safe to use and environmentally friendly. Titebond Tongue & Groove Flooring Glue gives the professional installer the highest level of protection against potential moisture problems, while maintaining a strong ultimate bond.

Print MSDS

Ordering
Information
Product
Features
Physical
Properties
Application
Guidelines
Limitations
Caution
Statement

For all types of laminate and floating floors, even over radiant heat systems

Superior bond strength

Passes Type II water-resistance testing

Low chalk temperature

Fast drying

Easy application process

Noticeable white color for easy cleanup

Easy cleanup when glue is wet

Resists solvents & water when dry

Freeze/thaw stable

Environmentally superior and safe to use

Non-toxic

Nonflammable

VOC-compliant

Type: Cross-linking polyaliphatic emulsion Non-reactive VOC: 13.7 g/L State : Liquid Weight/gallon : 9.1 lbs. Color : White Chalk temperature: 55°F. Dried Film: Translucent Flashpoint : > 200°F Solids : 48% Freeze/thaw stability : Stable Viscosity : 4,000 cps pH : 3.0 Storage life : 2 years in tightly closed container at 75°F.

*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)

Temperature	Strength	Wood Failure
Room Temperature	3,750 psi	72%
150°F. Overnight	1,750 psi	6%

Application Temperature

Above 55°F.

Assembly Time After Glue Application

5 minutes (70°F./50%RH)

Method of Application

Plastic bottles with fine tips.

Installation

Titebond Tongue & Groove Flooring Glue can be installed using the continuous bead method. When using this method, a water-resistant joint is created. Follow the flooring manufacturers’ directions for proper positioning of the adhesive bead. Some manufacturers prefer gluing the top of the tongue and others prefer gluing of the groove. Titebond Tongue & Groove Flooring Glue is the professional installer’s choice for either method.

Cleanup

Wet adhesive can be cleaned with water and a damp cloth. If adhesive has dried, scrape off excess. For specific cleaning instructions, please call Franklin Technical Service at 1-800-347-4583.

Titebond Tongue & Groove Flooring Glue passes Type II water-resistance tests. Do not use for joints below the waterline or continuous submersion. Do not use when temperature, glue or materials are below 55°F. KEEP FROM FREEZING. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Remove excess glue from surface while wet. Do not allow glue to dry as it will be difficult to remove.

No caution information is needed. Please refer to the Material Safety Data Sheet for further information.

Part No.	Size	Weight(lbs.)	UPC	Case UPC	Units Per Package	Packages Per Pallet
2104	16 Oz. Bottle	14.90	037083021042	10037083021049	12	100
2108	55 Gallon Metal Drum	538.80			1	4

Titebond Tongue & Groove Glue

Bond Strength ASTM D-905 (On Hard Maple)

Community Feed