- Bonds melamine, vinyl coated products, and HPL to porous materials
- Thicker formulation - fewer runs and drips
- Fast setting - Excellent strength
- Dries clear
- Long open time
- Fast initial tack
Type: Specialized vinyl acetate emulsion
Calculated VOC: 3.0 g/L
State : Liquid
Weight/gallon : 8.6 lbs .
Color : White
Chalk temperature: * Approximately 40 °F.
Dried Film: Clear
Flashpoint : > 200 °F.
Solids : 57%
Freeze/thaw stability : Unstable
Viscosity : 12,000 cps
pH : 4.0
Storage life : 24 months in tightly closed containers at 75 °F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
Bond Strength ASTM D-905 (On Hard Maple)
| |
Substrates |
Strength |
Substrate Failure |
| |
Melamine/Melamine Lap Shears |
329 psi |
100% |
| |
Melamine/particle Board |
339 psi |
100% |
Application Temperature
Above 40 °F.
Open assembly time
5 minutes (70 °F./50%RH)
Total assembly time
10-15 minutes (70°F./50%RH)
Minimum required spread
Approximately 6 mils or 250 square feet per gallon
Required clamping pressure
Enough to bring joints tightly together (generally, 30-80 psi for HPL,100-150 psi for softwoods,125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application
Easily spread with a roller spreader or brush, or may be transferred
to plastic bottles for finer gluing applications.
Cleanup
Damp cloth while glue is wet. Scrape off and sand dried excess.
Titebond Melamine Glue is not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. Vacuum pressing should only be used for veneers up to 1/16 inch in thickness. Do not use when temperature, glue or materials are below 40°F. If product has been frozen (gel-like appearance), it cannot be used. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF REACH OF CHILDREN.
CAUTION: EYE AND SKIN IRRITANT. Contains oxydipropyl dibenzoate and dipropylene glycol n-butyl ether. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
| Part No. | Size | Weight(lbs.) | UPC | Case UPC | Units Per Package | Packages Per Pallet |
| 4014 | 16 Oz. Bottle | 14.19 | 037083040142 | 10037083040149 | 12 | 100 |
| 4016 | Gallon Jug | 18.26 | 037083040166 | 10037083040163 | 2 | 63 |
| 4017 | 5 Gallon Pail | 45.81 | 037083040173 | | 1 | 24 |
| 4018 | 55 Gallon Drum | 491.71 | | | 1 | 4 |