- Environmentally safe - VOC-compliant
- Quick grab - Minimal bracing
- Nonflammable - No offensive odor
- Bond FRP to many common porous building materials
- Cleans easily with water in wet state
- Achieves NFPA Class A fire rating
Type: Proprietary emulsion polymer
Non-reactive VOC: 2.6 g/L
State : Low viscosity mastic
Weight/gallon : 11.6 lbs.
Color : Light beige
Flashpoint : > 200°F.
Solids : 67%
Freeze/thaw stability : Stable
Viscosity : 100,000 cps
pH : 5.0
Storage life : Up to 2 years in unopened container
Coverage:
Application Temperature
Over 50°F and below 90°F for adhesive and substrates.
Service Temperature Range
0°F. to 110°F.
Method of Application
V-notch trowel 3/16" wide x 1/4" deep, spaced 1/2" c.c.
Working Time
20 minutes at 70°F.
Working Surfaces
Surfaces must be dry and free of any material that may deter adhesion, including severe and thick amounts of drywall joint compound. Patch large holes and depressions and remove any bumps or high spots, dust, oil, and grease. Concrete surfaces must be well cured and completely dry. Cut and pre-fit all panels. Lay fiberglass panels flat and let them acclimate to room temperature 24 hours before installing. Note: Panels used in conjunction with channel moldings should NOT fit tightly into the moldings. Leave a small gap under the molding for expansion and follow panel manufacturer’s recommendations. Any holes drilled through the panels for fasteners, pipes or conduits should be oversized to allow for natural movement of the panel. Click for FRP Installation Guide.
Cleanup
Tools and excess adhesive may be cleaned with water while wet. If adhesive has dried, use mineral spirits. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent in an out-of-the-way area to make sure it will not mar or attack the surface.
For best results, store GREENchoice Fast Grab FRP Adhesive above 50°F. Do not use over treated plywood or metal, plastic, foam board, painted surfaces, sealed concrete, certain types of specially treated or moisture resistant gypsum wallboard, or other non-porous surfaces. For these substrates, for use on freezers, and any other application other than FRP, call Technical Service at 1-800-347-4583. KEEP FROM FREEZING.
CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact areas persists, contact physician. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
| Part No. | Size | Weight(lbs.) | UPC | Case UPC | Units Per Package | Packages Per Pallet |
| 4054 | 4 Gallon Pail | 50.58 | 037083040548 | | 1 | 36 |
| 4056 | Gallon Pail | 24.70 | 037083040562 | 10037083040569 | 2 | 75 |
| 4059 | 3.5 Gallon Pail | 43.77 | 037083040593 | | 1 | 36 |