- High-strength, permanent bonds and fast set - 75 seconds
- Interior/Exterior - Waterproof
- Adheres to Melamine, FRP, ceramics, metals and most common substrates
- Greatly reduces or eliminates mechanical fasteners in many applications
- Solvent free and nonflammable
- Versatile performance
- Trim & molding, chair rails, cabinetry and case goods
- Birdhouses, planters, furniture and other outdoor applications
- UV indicator for easy cleanup
Type: Polyurethane
Non-reactive VOC: 0 g/L
State : Solid
Weight/gallon : 9.8 lbs.
Color : Translucent
Dried Film: Opaque white
Freeze/thaw stability : Will not freeze
Solids : 100%
Viscosity : 9,500 (cps) @ 250°F.
Storage life : 15 months in unopened container. 4 weeks after opened.
Bond Strength at room temperature
| Time |
Strength psi of MP75 |
| 10 min |
270 |
| 1 hour |
600 |
| 24 hours |
900 |
Application Temperature
250°F.
Service Temperature Range
-20°F. to 275°F.
Method of Application
The HiPURformer Advanced Bonding System utilizes the patented, innovative hot melt
adhesive applicator from German manufacturer Steinel. This high quality tool provides the perfect delivery system for HiPURformer adhesives. It is cordless, lightweight and extremely easy to use.
Coverage
Approximately 71 linear feet of 1/16" (OD bead) per 50 gram cartridge
Working Surfaces
Surfaces must be dry and free from any dust, dirt or other material that may deter adhesion. Apply adhesive using the HiPURformer adhesive applicator. Join the surfaces to be bonded together, ensure proper alignment of pieces and hold firmly in place until the adhesive sets (approximately 75 seconds).
Cleanup
Allow any squeeze out to become firm and remove it with a putty knife or scraper. Fully cured material can be removed by sanding or cutting. Do not use heat or flame to remove adhesive.
Important
To prolong the shelf life after initial use, extrude a one-inch bead of adhesive to purge any air from the cartridge tip, then immediately replace the cartridge cap tightly, while the adhesive is hot. ALWAYS WEAR GLOVES.
Important: To prolong the shelf life after initial use, extrude a one-inch bead of adhesive to purge any air from the cartridge tip, then immediately replace the cartridge cap tightly, while the adhesive is hot. ALWAYS WEAR GLOVES.
Not for use on copper or metal alloys containing a high percentage of copper. Not for continuous submersion or use below the waterline.
WARNING: Eye and Skin Irritant. Potential Skin and Respiratory Sensitizer. Caution: Contact with heated product may cause thermal burns. Always wear gloves. Contains isocyanates. Avoid contact with skin and eyes. Avoid prolonged or repeated contact with vapors. Do not swallow. May be harmful if swallowed. First Aid: If swallowed, do not induce vomiting. Call physician immediately. If eye contact occurs, flush eyes with water for 15 minutes and call physician. In case of skin contact, wash skin with soap and water. Seek medical attention if sensitization or rash occurs. If inhaled, move to fresh air and contact physician. For additional safety information, refer to Material Safety Data Sheet or call 1-800-347-4583.
KEEP OUT OF THE REACH OF CHILDREN.
| Part No. | Size | Weight(lbs.) | UPC | Case UPC | Units Per Package | Packages Per Pallet |
| 1321 | 50 gram Cartridge | 2.44 | 037083013214 | 10037083013211 | 10 | 120 |