- For use on acoustical ceiling tiles
- Fast grab - Excellent adhesion
- "No sag" installation
- Water cleanup
- Passes ASTM D-1779 specification
- NPFA Class A fire rating when tested in accordance with ASTM E-84
Type: Polymer emulsion
Calculated VOC: 3.0 g/L
State : Medium-viscosity mastic
Weight/gallon : 11.9 lbs.
Color : Beige
Flashpoint : > 200°F.
Solids : 70%
Freeze/thaw stability : Stable
Viscosity : 200,000 cps
pH : 5.0
Storage life : More than 2 years in unopened container
|50-60 sq. ft. of ceiling tile per gallon.
Over 50°F. for adhesive and substrates
Service Temperature Range
0°F. to 120°F.
Method of Application
Surfaces must be dry and free from any material that may deter adhesion. Using the "butter" method, spread a thin layer of adhesive to cover a large area of each corner of the tile. Then apply adhesive in 1"to 1 1/2"mounds (golf ball size). Place mounds 2-3 inches in from the corners on the back of the tile. Immediately press tile into position, working the tile back and forth 1/2" to flatten the mounds of adhesive. Adhesive must be flattened to a mound 3/16" to 3/8" thick and 2 1/2" in diameter. When installing interlocking tile, do not slide tile into groove of adjacent tile until it has been positioned to its proper level.
Tools and excess adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesive may be cleaned with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
50-60 sq. ft. of ceiling tile per gallon.
Not recommended for use on tiles larger than 12" x 12". For best results, store Titebond Solvent Free Acoustical Ceiling Tile Adhesive above 50°F. Do not store product outside if temperature is below 50°F. Product must be stored inside a climate controlled area that is above 50°F. For further questions about applications that are not covered here, please call Tech Service at 1-800-347-GLUE (4583).
CAUTION: EYE AND SKIN IRRITANT. Contains propylene glycol. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact areas persists, contact physician. For additional information, refer to Material Safety Data Sheet.
KEEP OUT OF THE REACH OF CHILDREN.
|Part No.||Size||Weight(lbs.)||UPC||Case UPC||Units Per Package||Packages Per Pallet
|2704||4 Gallon Pail||50.69||037083027044|| ||1||36