Titebond on Instagram Titebond on Facebook Titebond on YouTube MSDS
Loading

Titebond Solvent Free Indoor/Outdoor Carpet & Tile Adhesive


Titebond Solvent Free I/O Carpet & Tile Adhesive is an acrylic-latex adhesive for the installation of carpet, artificial turf and plastic-backed corded tiles. It offers good initial tack for a quick and easy installation. It also provides a strong bond that is highly water-resistant.

Titebond Solvent Free is environmentally superior and contains no ozone-depleting chemicals. It is nonflammable, emits no harmful fumes or offensive odors and cleans up with water.

Revised June 2015

  • Ideal for carpets, artificial turf and tiles

  • Quick grab - Professional strength

  • Excellent water-resistance

  • Environmentally safe - Nonflammable

Type: Synthetic rubber, acrylic resin emulsion Calculated VOC: 186 g/L State : Light viscosity mastic Weight Per Gallon : 10 lbs. Color : Beige Flashpoint : > 200°F. Solids : 65% Freeze/thaw Stability : Unstable Viscosity : 40,000 cps Storage Life : 24 months in tightly closed containers at 75°F.

Coverage
1/8" U-notch trowel - approximately 40 sq. ft. per gallon;
3/32" U-notch trowel - approximately 50 sq. ft. per gallon

*Refer to Application Guidelines for trowel recommendations.

Application Temperature

Above 40°F. for adhesive and substrates


Service Temperature Range

-20°F. to 120°F.


Method of Application

For smooth and foam-backed carpets, use a 3/32" U-notch trowel. For deeply textured backings or rough substrates, use a 1/8" U-notch trowel.


Working Time

30-40 minutes maximum


Working Surfaces

Surface must be dry and free of any material that may deter adhesion. Cut and fit all materials before applying adhesive. Apply adhesive using the proper trowel. Allow adhesive to set up for 10-20 minutes. Lay goods into wet adhesive and seal all seams. For unitary and secondary backed goods, roll with a 75 lb. roller. For foam-backed goods, use a pushbroom or carpet tube to press goods into adhesive. Allow adhesive to dry well before exposing installations to cleaning water.


Cleanup

Clean tools and excess adhesive with water while wet. If adhesive has dried, use mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent in an out-of-the-way area to make sure it will not mar or attack the surface.


Keep from freezing. Adhesive is not freeze/thaw stable. This product should not be used between two non-porous surfaces. Materials and adhesive should be kept at 70°F. prior to application. Air temperature should be at least 40°F. during application.
CAUTION: EYE AND SKIN IRRITANT. Contains diethylene glycol. Do not swallow. Do not allow eye contact or prolonged skin contact. First Aid: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact reas with soap and water. If irritation from eye and skin contact areas persists, contact physician. For additional information, refer to Safety Data Sheet.
KEEP OUT OF THE REACH OF CHILDREN.
Part No.SizeWeight(lbs.)UPCCase UPCUnits Per PackagePackages Per Pallet
5145Quart Bottle14.39037083051452100370830514596112
5146Gallon Can18.1103708305146910037083051466290
  • woodworking
  • construction
  • caulk
  • flooring
  • Titebond Woodglues
  • PROVantage
  • WeatherMaster
  • Green Choice
  • Titebond Premium
  • XtremeFoam