Titebond on Instagram Titebond on Facebook Titebond on YouTube MSDS
Loading

WeatherMaster SuperFoam


Titebond® WeatherMaster SuperFoam™ 100, 200 and 600 are low pressure, medium density, two-component spray polyurethane foams. These products are designed to fill and seal various size voids (100, 200 and 600), deaden sound or reduce vibration. SuperFoam’s excellent adhesion properties create a continuous air barrier that helps to improve indoor air quality and lowers heating and cooling costs. In addition, these products are UL GREENGUARD™ Gold Certified.

SuperFoam’s excellent adhesion properties create a continuous air barrier. This quality completes the building envelope, resulting in improved indoor air quality and lower heating and cooling costs. SuperFoam is a Class 1(A) fire rated foam that meets various building code requirements.

Download Titebond WeatherMaster SuperFoam 100, 200 and 600.

Titebond® WeatherMaster™ SuperFoam™ 100, 200 and 600 exceeds all of the following specifications: ASTM D1622; ASTM C518; ASTM E283; ASTM E2183; ASTM D1621; ASTM D2126; ASTM D2856; UL GREENGUARD GOLD and UL

Revised September 2017

Type: Low pressure, medium density, two-component spray polyurethane foam Type: Low pressure, medium density, two-component spray polyurethane foam VOC: 25 g/L Density: 1.75 lb/ft3 (28kg/m3) R-value: 7.2 per inch Dimensional Stability: ± 5% Closed-cell Content: 95% Tack Free Time: 12 months

Coverage (maximum): Approximate Coverage:
Item Description Coverage
84100 WeatherMaster 100 SuperFoam 100 bdft (9.8 m²)
84200 WeatherMaster 200 SuperFoam 200 bdft (19 m²)
84600A WeatherMaster 600 SuperFoam PART A 600 bdft (56.2 m²)
84600B WeatherMaster 600 SuperFoam PART B 600 bdft (56.2 m²)


Quick Start SuperFoam 100 & 200

1. Shake kit for one (1) to two (2) minutes to ensure proper mixing. 2. Open kit. Remove nozzle packet and read operating instructions.
3. Open valves. Top flap may be removed or left in place during use or storage. Extend attached gun hose assembly. 4. Before attaching nozzle, apply petroleum jelly on face of gun. After attaching nozzle*, dispense into “test shot receptacle”. Unit is ready to use.
*For detailed nozzle attachment instructions, see Operating Instructions located inside kit or click here.


Quick Start SuperFoam 600

1. Shake each cylinder for one (1) to two (2) minutes to ensure proper mixing. 2. Open kit. Remove nozzle packet and read operating instructions. Thread red coded hose to A component tank and tighten with a wrench (included).
3. With tanks upright, open tank valves completely. Tank valves must be upright during use. 4. Before attaching nozzle, apply petroleum jelly on face of gun. After attaching nozzle*, dispense into “test shot receptacle.” Unit is ready to use.
*For detailed nozzle attachment instructions, see Operating Instructions located inside kit or click here.


 

Personal Protective Equipment (PPE) is recommended.


This product is extremely flammable when dispensing. Carefully review cautions. Optimum temperature for use is between 65° - 80° F (18° - 27° C). Clean oil, dust and grease off surfaces to be foamed. Make sure to cover surrounding surfaces. Wear appropriate safety glasses, gloves and protective clothing. Consult SDS for product safety information. For questions, please call our Help Line at 1.800.347.4583 or visit us at Titebond.com.
Low pressure spray polyurethane foams (SPF) are composed of a disocyanate, hydrocarbon blowing agent, and a polyol. For spray polyurethane foams: wear protective glasses with side shields or goggles, nitrile gloves, and clothing that protects against dermal exposure. Recommend using in well-ventilated area and with certified respiratory protection or a powered air purifying respirator (PAPR). Additional information can be found in the Product Stewardship Guide from ICP Adhesives http://www.fomo.com/Data/Sites/1/Assets/ModuleDependencies/csFomoMediaView/media/a14009_psg_rev052016.pdf) Read the SDS and instructions carefully before use. The urethane foam from these ingredients will support combustion and may present a fire hazard if exposed to a fire or to excessive heat about 240 F (116 C). For professional use only. Building practices unrelated to materials can lead to potential mold issues. Material suppliers cannot provide assurance that mold will not develop in any specific system.

WARNINGS: Follow safety precautions and wear protective equipment as recommended. Prolonged inhalation exposure may cause respiratory irritation/sensitization and/or reduce pulmonary function in susceptible individuals. Onset may be delayed. Pre-existing respiratory conditions may be aggravated. We recommend that the product is used in a well-ventilated area and with certified respiratory protection. NIOSH positive pressure supplied air respirator is recommended if exposure guidelines may be exceeded. Contents may be very sticky and irritating to skin and eyes, therefore wear safety glasses with side shields or goggles, nitrile gloves, and clothing that prevents against dermal exposure while operating. If liquid chemical comes in contact with skin, first wipe thoroughly with dry cloth, then rise affected area with water. Wash with soap and water afterwards, and apply hand lotion if desired. If liquid chemical comes in contact with eyes, immediately flush with large volumes of water for at least 15 minutes and get medical help at once. If liquid is swallowed, get immediate medical attention. Do not induce vomiting. If breathing is difficult, give oxygen. If breathing has stopped, give artificial respiration. Products manufactured or produced from these chemicals are organic and therefore combustible. Each user of any product should carefully determine if there is a potential fire hazard associated with such product in a specific usage. KEEP OUT OF REACH OF CHILDREN
Part No.SizeWeight(lbs.)UPCCase UPCUnits Per PackagePackages Per Pallet
84100TB 100 2 Part Spray Polyurethane Foam Kit - 1 Pack26.400037083841008 126
84200TB 200 2 Part Spray Polyurethane Foam Kit - 1 Pack41.000037083842005 126
84600ATB 600 Spray Polyurethane Foam - PART A - 1 Pack59.700037083846003 19
84600BTB 600 Spray Polyurethane Foam - PART B - 1 Pack56.000037083846003 19
The Manufacturer warrants only that the product shall meet its specifications: this warranty is in lieu of all other written or unwritten, expressed or implied warranties and The Manufacturer expressly disclaims any warranty of merchantability, or fitness for a particular purpose. The buyer assumes all risks whatsoever as to the use of the material. Buyer’s exclusive remedy as to any breach of warranty, negligence or other claim shall be limited to the replacement of the material. Failure to strictly adhere to any recommended procedures shall release The Manufacturer of all liability with respect to the materials or the use thereof. User of this product must determine suitability for any particular purpose, including, but not limited to, structural requirements, performance specifications and application requirements prior to installation and after product is applied.
  • woodworking
  • construction
  • caulk
  • flooring
  • Titebond Woodglues
  • PROVantage
  • WeatherMaster
  • Green Choice
  • Titebond Premium
  • XtremeFoam