- Ready to Use - No mixing or primer required; reduces labor and installation cost
- Ultra Low VOC - VOC-compliant in all 50 states
- Joint Movement Capability ± 35% - Remains permanently flexible
- Textured Look - Perfect for stucco, concrete, brick and more!
- Paintable - May be painted one hour after application
- Wide Temperature Application Range - Suitable for all climates
- Six textured colors perfect for stucco, concrete, brick and more
Type: Advanced polymer
Reactive VOC: 29.1 g/L
Solids : 97.77%
Weight Per Gallon : 10.9 lbs.
Viscosity : 960,000 cps
Flashpoint : Solvent free/Not applicable
Storage Life : 18 months in tightly closed containers below 75°F (24°C)
Coverage (maximum): Approximate length of bead according to bead diameter:
|10.1 oz. Cartridge
Above 0°F (-18°C)
Service Temperature Range
-75°F to 300°F (-59°C to 149°C)
Method of Application
For a 1/4” bead, approximately 10-15 minutes, depending on temperature and humidity.
Surfaces must be cleaned down to the original substrate and free from any material that may prevent adhesion. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability. To ensure neat sealant lines, mask areas adjacent to joints.
Uncured material may be cleaned with isopropyl alcohol or acetone. After curing, excess sealant must be cut or scraped away. Follow solvent vendor’s precautions when using solvents.
Air, sealant and surface temperature should be above 0°F(-18°C).WeatherMaster ULTIMATE MP Textured Sealant is intended for exterior use. If light colors are used indoors, sealant must be painted. Painting may occur one hour after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended. To ensure neat sealant lines, mask areas adjacent to joints. Always apply sealant in a bead form. Once sealant is applied, do not wipe with solvents. Once sealant is dry to the touch and does not transfer, remove masking tape. If joint depth exceeds 1/2”, use backing material. Not designed for continuous submersion or use below the waterline. Store unused product in dry location below 75°F (24°C). For questions regarding use, please call our Help Line 1-800-347-4583.
CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. First Aid: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact areas persists, contact physician. Product releases methanol during cure. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
|Part No.||Size||Weight(lbs.)||UPC||Case UPC||Units Per Package||Packages Per Pallet
|88001||10.1 Oz. Cartridge - White||10.90||037083880014||10037083880011||12||108
|88011||10.1 Oz. Cartridge - Buff||10.90||037083880113||10037083880110||12||108
|88021||10.1 Oz. Cartridge - Gray||10.90||037083880212||10037083880219||12||108
|88031||10.1 Oz. Cartridge - Stone||10.90||037083880311||10037083880318||12||108
|88041||10.1 Oz. Cartridge - Bronze||10.90||037083880410||10037083880417||12||108
|88051||10.1 Oz. Cartridge - Cream||10.90||037083880519||10037083880516||12||108
If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Buyer’s sole remedy shall be limited only to the replacement of product exclusive of cost of labor. No other warranties are expressed or implied.