Titebond Concrete Repair Sealant


Titebond® Concrete Repair is a durable, acrylic latex formula for the repair of cracks in concrete, masonry and stucco surfaces. It is ideal for sidewalks, patios, basements, driveways, steps, mortar joints and house structures. In addition, it develops a strong, flexible bond that will not chip, peel or pull away from the surface.

Titebond Concrete Repair dries quickly to a textured gray color that blends well with the surrounding surfaces. It provides an air-tight weather-resistant seal that helps prevent water and ice damage. In addition, Titebond Concrete Repair is ready to use, extrudes easily and cleans up with water when wet.

Download Titebond Concrete Repair Sealant Sheet

Specifications
    Complies with the following requirements:
  • ASTM C834 Type OP Grade -18°C

Revised August 2017

Product Features

Physical Properties

Type Acrylic Non-reactive VOC 21 g/L (<1.5%)
Color Gray Weight Per Gallon 14.02 lbs.
Solids 83% Flashpoint Solvent free/Not applicable
Viscosity 550,000 cps Storage Life 24 months in tightly closed containers at 50°F to 80°F.
Freeze/thaw Stability Stable

Coverage (maximum): Approximate length of bead according to bead diameter:
Container 1/4" bead 3/8" bead 1/2" bead
10.1 oz. Cartridge 31 ft. 14 ft. 8 ft.

Application Guidelines

Application Temperature Above 40°F and below 120°F.

Service Temperature Range -25°F. to 180°F.

Method of Application Cartridge/caulking gun

Working Time Approximately 10-15 minutes for a 1/4" bead

Working Surfaces Surfaces must be cleaned down to the original substrate, dry, and free from any material that may deter adhesion.

Cleanup Clean excess material with a damp cloth. Clean hands and tools with soap and water. Scrape dried excess.

Dry Time Titebond Concrete Repair should be dry to the touch and ready to paint in 2-4 hours.

Limitations

Do not apply if rain is expected within 12 hours. Air, sealant and surface temperature should be above 40°F. It is not designed for continuous submersion or use below the waterline. For questions, please call our Help Line at 1-800-347-4583.

Caution Statements

WARNING: EYE, SKIN AND RESPIRATORY IRRITANT. Contains acrylic polymer, limestone, titanium dioxide, ethylene glycol. Harmful if swallowed. Long term exposure to ingredients in this product can increase the risk of certain cancers. Adverse reproductive effects have been reported in animals. Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Wear appropriate personal protective equipment. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes; contact physician. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

WARNING: This product contains a chemical known to the state of California to cause cancer and birth defects or other reproductive harm.

Ordering Information

Part No.SizeWeightUPCCase UPCUnits Per PackagePackages Per Pallet
317110.1 Oz. Cartridge15.000370830317131003708303171012108


Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com
Franklin International