Titebond Fast Set Polyurethane Construction Adhesive

Titebond® Fast Set Polyurethane Construction Adhesive is a one-component, advanced adhesive technology designed to build strength faster than other comparable products. It can be used for interior and exterior construction projects, and is the highest performing product of its kind, offering unmatched strength and durability even when bonding non-porous materials. It offers a fast set-up time as well as a smooth bead for effortless extrusion – even in near-freezing temperatures. It is ideal for virtually all building materials, including wet, frozen, engineered and treated lumber, metal, plastic, foam, mirror, concrete and brick.



  • Faster set time and cure – develops strength quicker than common construction adhesives
  • Permanently bonds most building materials
  • Cold weather extrusion – extrudes down to 32°F
  • Provides a smoother, more full-bodied adhesive bead that offers minimal shrinkage

Titebond Fast Set Polyurethane Adhesive exceeds all of the following specifications: American Plywood Association AFG-01, ASTM C557, ASTM D3498, CAN/CGSB-71.25M and CAN/CGSB-71.26M
Revised May 2015

Product Features

Physical Properties

Viscosity 150,000 cps. Solids 98%
Open Time 15-20 minutes at 50% relative humidity Flashpoint > 200 °F
Freeze/thaw Stability Will not freeze Shrinkage None
Weight Per Gallon 11.0 lbs. Odor Low
Calculated VOC 20 g/L Shelf Life (Unopened) 12 months from the date of manufacture

Coverage (maximum): Approximate length of bead according to bead diameter
Container 1/8” bead 1/4” bead 3/8” bead
10 oz. Cartridge 123 ft. 30 ft. 13 ft.
28 oz. Cartridge 343 ft. 86 ft. 38 ft.

Application Guidelines

Application Temperature 32 °F. to 120 °F.

Service Temperature Range -20°F. to 120°F.

Working Time Approximately 1 hour

Method of Application Cartridge/caulking gun

Skin Time 15-20 minutes at 50% relative humidity

Working Surfaces Surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Apply adhesive to only one of the surfaces to be bonded. NOTE: When bonding subfloors or wet, frozen and treated lumber, nail or screw each sheet as recommended by the American Plywood Association.

Cleanup Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.


Titebond® Fast Set Polyurethane Construction Adhesive is not designed for continuous submersion. Adhesive can be difficult to remove from skin and clothing. It is recommended that gloves be worn. When using on non-porous substrates, mist with water to speed curing.

Caution Statements

WARNING: EYE AND SKIN IRRITANT. Potential skin and respiratory sensitizer. Contains isocyanates containing polymers. Avoid prolonged or repeated contact with skin or vapors. Do not allow eye contact. Use only with adequate ventilation. First Aid: If skin contact occurs, wash affected area with soap and water. If irritation persists or allergic reactions develop, contact physician. If adverse respiratory affects occur, remove individual to fresh air and contact physician. If eye contact occurs, flush eyes with water for 15 minutes; contact physician. If swallowed, do not induce vomiting; contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Ordering Information

Part No.SizeWeightUPCCase UPCUnits Per PackagePackages Per Pallet
422110 Oz. Cartridge15.320370830422141003708304221112108
422228 Oz. Cartridge41.13037083042221100370830422281244

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
Franklin International