Titebond Solvent Free Clear Pressure Sensitive Adhesive


Titebond Solvent Free Clear Pressure Sensitive Adhesive is a latex-based, clear thin spread formula for the installation of vinyl, vinyl composition and asphalt tiles, as well as foam-backed hardwood parquet tiles. It combines a fast tack with a long open time.

Titebond Solvent Free is environmentally superior and contains no ozone-depleting chemicals. It is nonflammable, emits no harmful fumes and cleans up with water.

Product Features

Physical Properties

Type Latex Calculated VOC 19.04 g/L
State Low viscosity mastic Weight Per Gallon 9.2 lbs.
Color Beige Flashpoint > 200°F.
Solids 65% Freeze/thaw Stability Stable (5 cycles @20 °F.)
Viscosity Roller, trowel, spray grade Storage Life 24 months in tightly closed containers at 75°F.
Coverage
1/32" U-notch trowel- approximately 250 sq. ft. per gallon
1/16" square-notch trowel- approximately 150 sq. ft. per gallon
Spray, roller or brush- approximately 125-150 sq. ft. per gallon

*Refer to Application Guidelines for trowel recommendations.

Application Guidelines

Application Temperature Above 65°F. for adhesive and substrates

Service Temperature Range 40°F. to 120°F.

Method of Application Airless mastic spray gun, roller, trowel or brush. For smooth surfaces, use a
1/32" U-notch trowel. For rough surfaces, use a 1/16" square-notch trowel.

Working Time 72 hours maximum

Working Surfaces Surface must be dry and free of any material that may deter adhesion. Cut and fit all material before applying adhesive. Apply adhesive. Adhesive is ready when it becomes nearly clear and no longer transfers to the finger when lightly touched. Set tiles in place carefully because they will not slide. Roll within 12 hours. Allow adhesive to dry well before exposing installations to cleaning water.

Cleanup Clean tools and excess adhesive with water while wet. If adhesive has dried, use mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent in an out-of-the-way area to make sure it will not mar or attack the surface.

Limitations

Do not use directly over or under solid vinyl tile or sheet goods. Remove old vinyl flooring before laying new floor. Keep from freezing. Subfloor and materials should be at least 65°F. for 24 hours before and after installation.

Caution Statements

CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye and skin contact areas persists, contact physician. For additional information, refer to Safety Data Sheet.
KEEP OUT OF THE REACH OF CHILDREN.

Ordering Information

Part No.SizeWeightUPCCase UPCUnits Per PackagePackages Per Pallet
51244 Gallon Pail39.59037083051247 136
5126Gallon Can20.3103708305126110037083051268275


Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com
Franklin International