Titebond Roof Plus Sealant


Titebond Roof Plus Sealant is a water-resistant, solvent based, elastomeric rubber sealant designed for roofing applications such as metal trim, solar roof systems, architectural metals, painted metals, aluminum and general roofing applications.

Download Titebond Weathermaster Roof Plus Sealant Sheet

Specifications
    Complies with the following requirements:
  • ASTM C920, Type S, Grade NS, Class 12.5, Use T, NT, M, A and O
  • Federal Specification TT-S-00230C Type II Class B
  • SCAQMD Rule #1168

Revised August 2017

Product Features

Physical Properties

Type Synthetic Elastomeric Rubber Non-reactive VOC 315 g/L
Color Clear Weight Per Gallon 7.9 lbs.
Solids 68% Flashpoint 80°F.
Viscosity 700,000 to 1,000,000 cps. Freeze/thaw Stability Stable
Storage Life 24 months in tightly closed containers at 50ºF to 80ºF.

Coverage (maximum): Approximate length of bead according to bead diameter:
Container 1/4" bead 3/8" bead 1/2" bead
10.1 oz. Cartridge 31 ft. 14 ft. 8 ft.

Application Guidelines

Application Temperature 20°F to 100°F.

Service Temperature Range -40°F. to 180°F.

Method of Application Cartridge/caulking gun

Tooling Time For a 1/4" bead, approximately 10-15 minutes

Working Surfaces For best results, surfaces should be clean, dry and free from any material that may deter adhesion.

Cleanup Clean tools and excess material with mineral spirits before it dries. Scrape dried excess. Follow solvent vendor’s precautions when using solvents.

Painting Painting may occur two hours after application.

Limitations

In colder weather (50°F and below) product should be stored at room temperature for 24 hours prior to application for easier extrusion. Protect unopened containers from heat and direct sunshine. Do Not Thin. Do not use for exterior glazing. For questions, please call our Help Line at 1-800-347-4583.

Caution Statements

WARNING: FLAMMABLE LIQUID AND VAPOR. Contains xylene, ethylbenzene, and light petroleum distillates. Keep away from heat, sparks and flame. May cause eye, skin, and respiratory tract irritation. Avoid contact with eyes, skin, and clothing. Do not swallow. Do not breathe vapors. Use only with adequate ventilation. Keep container tightly closed. Wash thoroughly after handling. Contains material which can cause cancer. Intentional misuse by deliberately inhaling the contents may be harmful or fatal. First Aid: If swallowed, call a Poison Control Center or doctor immediately. In case of eye contact, flush with water for 15 minutes. For skin contact, wash thoroughly with soap and water. If respiratory difficulty, remove to fresh air. If irritation or breathing difficulty persists, seek medical attention. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

WARNING: This product contains a chemical known to the State of California to cause cancer.

Ordering Information

Part No.SizeWeightUPCCase UPCUnits Per PackagePackages Per Pallet
324110.1 Oz. Cartridge9.640370830324131003708303241012108


Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com
Franklin International