Titebond Translucent Wood Glue


Titebond Translucent Wood Glue is designed for general household and woodworking projects. It provides a virtually invisible glue line and bonds stronger than the wood. A strong tack and fast speed of set helps reduce clamp time. When dry, this wood glue is unaffected by finishes and sands easily.

Also ideal for craft projects, Titebond Translucent is easy to use, non-toxic and cleans up with water. It is specifically designed for wood, particleboard, hardboard, leather, cloth and most other porous materials.

Conforms to ASTM D-4236

Product Features

Physical Properties

Type Polyvinyl acetate emulsion Calculated VOC 10.7 g/L
State Liquid Weight Per Gallon 9.1 g/L
Color White Chalk Temperature * Approximately 50°F.
Dried Film Translucent Flashpoint > 200°F.
Solids 45% Freeze/thaw Stability Stable
Viscosity 8500 cps. Storage Life 24 months in tightly closed containers at 75°F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)
  Temperature Strength Wood Failure
  Room Temperature 3,550 psi 50%
  150°F. Overnight 1,600 psi 15%

Application Guidelines

Application Temperature Above 50°F.

Open Assembly Time 5 minutes (70°F./50%RH)

Total Assembly Time 10-15 minutes (70°F./50%RH)

Minimum Required Spread Approximately 6 mils or 250 square feet per gallon

Required Clamping Pressure Enough to bring joints tightly together (generally, 100-150 psi for soft woods, 125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.

Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations

Titebond Translucent Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue, or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Caution Statements

No caution information is needed. Please refer to the Safety Data Sheet for further information.

Ordering Information

Part No.SizeWeightUPCCase UPCUnits Per PackagePackages Per Pallet
61238 oz. Bottle8.010370830612391003708306123612160


Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com
Franklin International