Titebond Concrete Joint SL Sealant

Titebond® Concrete Joint SL Sealant is a one-component, self-leveling, premium grade, high performance advanced polymer sealant which is specifically engineered for contraction/expansion joints and cracks in concrete decks and floors. Concrete Joint SL Sealant is designed to flow easily and smoothly into concrete cracks and joints, providing a permanent and durable seal. Meets or exceeds: ASTM C920 Type S Grade P Class 25, Use T and M CAN/CGSB-19.13-M87 Class C-1-40-B-N & C-1-25-B-N Federal Specification TT-S-00230C Type I Class A Revised March 2013

Product Features

• Excellent adhesion and flexibility
• Smooth, easy flow
• Perfect for horizontal concrete joints and cracks
• Does not contain solvents or isocyanates
• VOC-compliant

Physical Properties

Type Advanced polymer	Non-reactive VOC 9 g/L (<0.15% wt.)
Weight/gallon 11.68 lbs.	Color Gray
Flashpoint < 200°F.	Solids 99%
Freeze/thaw stability Stable	Viscosity 105,000 cps
Storage life 18 months in tightly closed containers at 75°F.

Coverage (maximum): Approximate length of bead according to bead diameter:

Container	1/4" bead	3/8" bead	1/2" bead
10.3 oz. Cartridge	31 ft.	14 ft.	8 ft.

Application Guidelines

Application Temperature 0°F to 140°F.

Service Temperature Range -75°F. to 200°F.

Method of Application Cartridge/caulking gun

Tooling Time For a 1/4" bead, approximately 10 minutes, depending on temperature and humidity.

Working Surfaces For best results, surfaces should be clean, dry and free from any material that may prevent adhesion.

Cleanup Clean tools and excess material with mineral spirits before it dries. Scrape dried excess. Follow solvent vendor’s precautions when using solvents.

Limitations

Do not apply if rain is expected within 1 hour. Air, sealant and surface temperature should be above 0°F. Cure time is dependent upon ambient conditions including temperature, humidity and moisture. Typical skin time is +/- 20-30 minutes based on a temperature of 77°F @ 50% relative humidity. Paintable after product is tack free. For best results allow sealant to cure 48 hours before painting or exposing to traffic. Store unused product in dry location at or below 75°F. Not designed for continuous submersion or use below the waterline. For questions, please call our Help Line 1-800-347-4583 or visit us at titebond.com.

Caution Statements

CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. First Aid: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact areas persists, contact physician. Product releases methanol during cure. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Ordering Information

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

2020 Bruck Street, Columbus, Ohio 43207 CUSTOMER SERVICE 1-800-669-4583 TECH SERVICE 1-800-347-4583 www.titebond.com