Instant Bond Wood Adhesive Medium Adhesive


Titebond Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates.

The medium viscosity product offers an assembly time of 7 seconds and an initial cure speed of 5 seconds. In addition to typical bonding applications, it is ideal for filling knots and voids in wood, adhering pen tubes to blanks for pen turning applications, and for soaking end-grain to prevent splitting.

Product Features

Physical Properties

Type Ethyl cyanoacrylate Reactive VOC 20 g/L
State Liquid Weight Per Gallon 9.18 lbs.
Color Clear Flashpoint > 178° F.
Dried Film Translucent Freeze/thaw Stability Stable
Solids 100% Specific Gravity 1.1
Viscosity 120 cps Storage Life 2 yrs in tightly closed bottles stored between 40° & 75°F

Bond Strength ASTM D-1002
Temperature Shear Strength psi
Room Temperature Between 2800 and 4200 psi depending on substrate tested

Application Guidelines

Application Temperature Above 50°F.

Cure Speed 7 second handling, 5 second set, 30 second cure. *Full cure in 8 hours.

Service Temperature Range -65° to 200° F.

Cleanup Use acetone. Follow solvent vendor’s precautions.

Limitations

Titebond Instant Bond Wood Adhesive is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times may be affected by environmental conditions. For best results, apply adhesive between 55°F and 85°F. KEEP FROM FREEZING.

Caution Statements

DANGER: COMBUSTIBLE LIQUID. Bonds skin, eye and other tissue instantly. Contains ethyl-2-cyanoacrylate. Irritating to eyes, skin and respiratory tract. Do not allow eye or skin contact. Avoid breathing vapors. Do not swallow. Keep away from sources of heat. FIRST AID: For eye contact, do not force eyes open. Flush eyes with water for 15 minutes and seek medical attention immediately. For skin contact, flush contact area with water and seek medical attention. If inhaled, remove to fresh air. Seek medical assistance if symptoms persist. Refer to Safety Data Sheet for additional information. KEEP OUT OF THE REACH OF CHILDREN.

Ordering Information

Part No.SizeWeightUPCCase UPCUnits Per PackagePackages Per Pallet
62112 Oz. Bottle2.600370830621131003708306211015210
62124 Oz. Bottle3.610370830621201003708306212710270


Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com
Franklin International