Titebond Landscape Retaining Wall Adhesive


Titebond Landscape Retaining Wall Adhesive is a professional strength adhesive for use on retaining and landscape decorative wall systems. It is specifically formulated for use with concrete, wood, brick, masonry, pavers and most other common landscaping materials.

Titebond Landscape Retaining Wall Adhesive works well on dry, damp, and cold surfaces to provide a long lasting bond. It is strong enough to resist water and frost.

Product Features

Physical Properties

Type Synthetic elastomeric polymer Calculated VOC (Less Exempt Solvent) 281 g/L
State Medium-viscosity mastic Weight Per Gallon 9.0 lbs.
Color Light tan Flashpoint < 0 °F.
Solids 65% Freeze/thaw Stability Stable
Viscosity 130,000 cps Storage Life 18 months in tightly closed containers at 75 °F.

Coverage (maximum): Approximate length of bead according to bead diameter
Container 1/8” bead 1/4” bead 3/8” bead
10.5 oz. Cartridge 129 ft. 32 ft. 14 ft.
29 oz. Cartridge 355 ft. 89 ft. 39 ft.

Application Guidelines

Application Temperature 0°F. to 100 °F.

Service Temperature Range -20°F. to 120 °F.

Method of Application Cartridge/caulking gun

Working Time Approximately 10-20 minutes for a 1/4" bead

Working Surfaces Surfaces to be bonded should be clean, dry and free from any material that may deter adhesion.

Cleanup Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent on an out-of-the way area to make sure it will not mar or attack the surface.

Limitations

Titebond Landscape Retaining Wall Adhesive is not designed for continuous submersion or for use on polystyrene or polyethylene foams.

Caution Statements

DANGER: EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains acetone, hexane and toluene. Keep away from heat, sparks and flame. Use only with positive cross ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can cause eye or skin irritation. Prolonged or repeated overexposure to solvents in uncured product can cause central nervous system, peripheral nervous system, eye, skin, liver, kidney or respiratory system effects. First Aid: If dizziness or other adverse effects are experienced, move to fresh air; call physician if discomfort persists. If eye contact occurs, flush eyes with water for 15 minutes; contact physician immediately. If swallowed, do not induce vomiting; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN. WARNING: This product contains toluene, a chemical known to the State of California to cause birth defects or other reproductive harm.

Ordering Information

Part No.SizeWeightUPCCase UPCUnits Per PackagePackages Per Pallet
313110 Oz. Cartridge10.470370830313171003708303131412108
313228 Oz. Cartridge26.69037083031324100370830313211244


Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com
Franklin International