Titebond Roof Cement Sealant


Titebond Roof Cement is an all-weather, asphalt based patching compound specifically designed and formulated to repair cracks, seams, gaps and holes in roofing materials. This sealant is ideal for repair and new-construction roofing applications.

Use Titebond Roof Cement to set flashings, drip edges and roofing material edges as well as to install shingles and roll roofing. Seals around skylights, vents, chimneys, valleys and exhaust pipes.

Download Titebond Roof Cement Sealant Sheet

Specifications
    Complies with the following requirements:
  • Federal Specification SS-C-153C Type I
  • ASTM D3409
  • ASTM D4586 Type I, Class II
  • ASTM D6511
  • SCAQMD Rule #1168

Revised October 2017

Product Features

Physical Properties

Type Asphalt Reactive VOC 250 g/L
State Medium-viscosity mastic Weight Per Gallon 8.80 lbs.
Color Black Flashpoint > 105°F.
Solids 77.5% Freeze/thaw Stability Will not freeze
Viscosity 150,000 cps Storage Life 12 months in tightly closed containers at 75°F.

Coverage (maximum): Approximate length of bead according to bead diameter:
Container 1/4" bead 3/8" bead 1/2" bead
10.3 oz. Cartridge 32 ft. 14 ft. 8 ft.
29 oz. Cartridge 355 ft. 89 ft. 39 ft.

Application Guidelines

Application Temperature 50°F to 120°F.

Service Temperature Range -40°F. to 120°F.

Method of Application Cartridge/caulking gun

Tooling Time For a 1/4" bead, approximately 10-20 minutes

Working Surfaces For best results, surfaces should be clean, dry and free from any material that may deter adhesion.

Cleanup Clean tools and excess material with mineral spirits before it dries. Scrape dried excess. Follow solvent vendor’s precautions when using solvents.

Curing Time Allow product to cure between 30 and 60 days prior to application of reflective coating.

Limitations

In colder weather (50°F and below) product should be stored inside between 70°F and 80°F for 24 hours prior to application. Roof Cement should not be painted. Do not apply to foam, plastic, EPDM, Hypalon or similar type of synthetic rubber roof systems. If there is a question on compatibility, test a small area first before application to entire surface area. DO NOT APPLY IN THE PRESENCE OF A FLAME. Do Not Thin. For questions, please call our Help Line at 1-800-347-458.

Caution Statements

WARNING: COMBUSTIBLE LIQUID AND VAPOR. VAPORS HARMFUL. Contains mineral spirits and asphalt. Keep away from heat, sparks, flame and other combustible materials. Use only with positive cross ventilation. Maintain ventilation until solvent dissipates. Do not use in confined areas. Use this product only if adequate ventilation can be used and maintained. Avoid breathing vapors. High vapor concentrations are irritating to the nose, throat, and respiratory system. Prolonged or repeated overexposure to solvents in product can cause central nervous system, peripheral nervous system, eye, skin, liver, kidney or respiratory system effects. Causes eye and skin irritation. Harmful if swallowed. As when working with any solvent based material, appropriate personal protective equipment, including gloves, should be worn. FIRST AID: If dizziness or respiratory difficulty occurs, remove to fresh air. Seek medical attention if breathing difficulty continues. If swallowed, do not induce vomiting. Seek medical attention immediately. If eye contact occurs, flush eyes with water for 15 minutes and consult physician. For skin contact, wash with soap and water. Seek medical attention if irritation persists. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Ordering Information

Part No.SizeWeightUPCCase UPCUnits Per PackagePackages Per Pallet
321110.3 Oz. Cartridge9.770370830321161003708303211312108


Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com
Franklin International