GREENchoice Fast Grab FRP Adhesive
Titebond GREENchoice Fast Grab FRP Adhesive is a high-quality, VOC-compliant, adhesive specifically formulated for the installation of FRP (fiber-reinforced plastic) panels. Its fast grab and bonding power greatly reduce the need for extended bracing.
GREENchoice Fast Grab FRP is environmentally superior and contains no ozone-depleting chemicals. Unlike solvent-based adhesives, it is nonflammable, emits no harmful fumes and cleans up with water.
Download Titebond GREENchoice FRP Adhesive Sales Sheet
Meets GreenSeal GS-36, LEED, SCAQMD, CARB and NAHB Green Building specifications. FDA and Canadian Food Inspection Agency (CFIA) approved for indirect food contact.
|
|
Product Features
- Environmentally safe - VOC-compliant
- Quick grab - Minimal bracing
- Nonflammable - No offensive odor
- Bond FRP to many common porous building materials
- Cleans easily with water in wet state
- Achieves NFPA Class A fire rating
Physical Properties
|
Type Proprietary emulsion polymer
|
Non-reactive VOC 2.6 g/L
|
|
State Low viscosity mastic
|
Weight/gallon 11.6 lbs.
|
|
Color Light beige
|
Flashpoint > 200°F.
|
|
Solids 67%
|
Freeze/thaw stability Stable
|
|
Viscosity 100,000 cps
|
pH 5.0
|
|
Storage life Up to 2 years in unopened container
| |
Coverage:
Application Guidelines
Application Temperature
Over 50°F and below 90°F for adhesive and substrates.
Service Temperature Range
0°F. to 110°F.
Method of Application
V-notch trowel 3/16" wide x 1/4" deep, spaced 1/2" c.c.
Working Time
20 minutes at 70°F.
Working Surfaces
Surfaces must be dry and free of any material that may deter adhesion, including severe and thick amounts of drywall joint compound. Patch large holes and depressions and remove any bumps or high spots, dust, oil, and grease. Concrete surfaces must be well cured and completely dry. Cut and pre-fit all panels. Lay fiberglass panels flat and let them acclimate to room temperature 24 hours before installing. Note: Panels used in conjunction with channel moldings should NOT fit tightly into the moldings. Leave a small gap under the molding for expansion and follow panel manufacturer’s recommendations. Any holes drilled through the panels for fasteners, pipes or conduits should be oversized to allow for natural movement of the panel. Click for FRP Installation Guide.
Cleanup
Tools and excess adhesive may be cleaned with water while wet. If adhesive has dried, use mineral spirits. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent in an out-of-the-way area to make sure it will not mar or attack the surface.
Limitations
For best results, store GREENchoice Fast Grab FRP Adhesive above 50°F. Do not use over treated plywood or metal, plastic, foam board, painted surfaces, sealed concrete, certain types of specially treated or moisture resistant gypsum wallboard, or other non-porous surfaces. For these substrates, for use on freezers, and any other application other than FRP, call Technical Service at 1-800-347-4583. KEEP FROM FREEZING.
Caution Statements
CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact.
FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact areas persists, contact physician. For additional information, refer to Material Safety Data Sheet.
KEEP OUT OF THE REACH OF CHILDREN.
Ordering Information
| Part No. | Size | Weight | UPC | Case UPC | Units Per Package | Packages Per Pallet |
| 4054 | 4 Gallon Pail | 50.58 | 037083040548 | | 1 | 36 |
| 4056 | Gallon Pail | 24.70 | 037083040562 | 10037083040569 | 2 | 75 |
| 4059 | 3.5 Gallon Pail | 43.77 | 037083040593 | | 1 | 36 |
| Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use. |
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com
|
 |