Titebond Polyurethane Glue


Titebond Polyurethane Glue is a breakthrough in adhesive technology. It is the only polyurethane glue to combine a long 30-minute working time with a short 45-minute clamp time*. It is a versatile, professional-strength glue specifically formulated for multi-purpose applications.

In addition to its superior wood-to-wood performance, Titebond Polyurethane Glue is ideal for metals, ceramics, most plastics, HPL, Corian®, stone and other porous/non-porous materials. It is ready-to-use, offers excellent sandability and is unaffected by finishes.

Conforms to ASTM D-4236

Product Features

Physical Properties

Type Polyurethane Calculated VOC 0 g/L
State Liquid Weight Per Gallon 9.55 lbs.
Color Brown Flashpoint > 200°F.
Dried Film Yellow Freeze/thaw Stability Stable
Solids 100% Viscosity 8,500 cps
Storage Life 12 months in tightly closed containers at 75°F.

Bond Strength ASTM D-905 (On Hard Maple)
  Temperature Strength Wood Failure
  Room Temperature 3,500+ psi 60%
  150°F. Overnight 3,000 psi 50%

Application Guidelines

Application Temperature Above 50°F.

Assembly Time After Glue Application 25-30 minutes (70°F./50%RH)

Minimum Required Spread Approximately 6 mils or 250 square feet per gallon

Required Clamping Pressure Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).

Method of Application Easily spread with a roller, spreader or brush. *NOTE: This product cures by reaction with moisture. Changes in humidity, temperature and moisture content of the glued surfaces will affect open time and minimum clamp time. Maximum open time can be determined by excessive foam development in the adhesive. Minimum clamp time can be determined when squeeze out of adhesive becomes firm.

Cleanup Mineral spirits while glue is wet. Scrape or sand off dried excess.

Limitations

Titebond Polyurethane Glue is not for structural applications or for use below the waterline. For ease of application, the glue, temperature and materials to be bonded should be above 50°F. Lower temperatures will cause the glue to thicken.

Caution Statements

WARNING: EYE AND SKIN IRRITANT. POTENTIAL SKIN AND RESPIRATORY SENSITIZER. Contains isocyanate containing polymers. Contact causes eye irritation. Prolonged or repeated skin exposure may cause irritation and sensitization or allergic reaction. Contact may stain skin. Do not allow eye contact. Avoid prolonged or repeated contact with skin. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and seek medical attention. For skin, wash thoroughly with soap and water. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Ordering Information

Part No.SizeWeightUPCCase UPCUnits Per PackagePackages Per Pallet
230012 Oz. Bottle6.05037083023008100370830230056212
23024 Oz. Bottle4.290370830230221003708302302912245
23038 Oz. Bottle8.220370830230391003708302303612165
230852 Gallon Drum530.72  14


Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com
Franklin International