The HiPURformer™ Advanced Bonding System offers three adhesives, all of which are waterproof, provide strong, permanent bonds and reduce the need for clamping or bracing. For many applications, the system can eliminate the use of nails or staples, reducing time and money in filling, sanding and staining repair marks.
Complete HiPURformer Kit includes:
- One cartridge of WW30
- One cartridge of WW60
- One cartridge of MP75
- Adhesive applicator
- Adhesive applicator base (charger)
- Detachable power cord
- Instruction manual and product brochure
- A durable, weatherproof carrying case
WW30 and WW60 are specifically designed for woodworking; the significant differences are found in set time (WW30 offers a 30-second set time vs. a 60-second time for WW60) and gap-filling characteristics (WW60 fills gaps and irregularities to provide a stronger bond with "unfitted" materials).
MP75 is a premium, multi-purpose formula designed to bond most common materials including wood, Melamine, ceramics, metal, most plastics, marble, glass, FRP, brick and more. In addition, it offers a 75-second set time.
See the HiPURformer Advanced Bonding System in action.
- Interior/Exterior - Waterproof
- Versatile performance
- Greatly reduces the need for mechanical fasteners
- Solvent free and nonflammable
- UV indicator for easy cleanup
Non-reactive VOC 0 g/L
Weight/gallon 9.8 lbs
Color Translucent yellow
Dried Film Opaque white
Freeze/thaw stability Will not freeze
Viscosity See individual product page
Storage life 15 months in unopened container. 16 hours heated at 250°F
Bond Strength at room temperature
Service Temperature Range
-20°F. to 275°F.
Method of Application
The HiPURformer Advanced Bonding System utilizes the patented, innovative hot melt adhesive applicator
from German manufacturer Steinel. This high quality tool provides the perfect delivery system for HiPURformer adhesives. It is cordless, lightweight and extremely easy to use.
Approximately 71 linear feet of 1/16" (OD bead) per 50 gram cartridge
Surfaces must be dry and free from any dust, dirt or other material that may deter adhesion. Apply adhesive using the proper hot melt applicator tool. Join the surfaces to be bonded together, ensure proper alignment of pieces and hold firmly in place until the adhesive sets (approximately 30 seconds).
Allow any squeeze out to become firm and remove it with a putty knife or scraper. Sanding or cutting can remove fully cured material. Do not use heat or flame to remove adhesive.
To prolong the shelf life after initial use, extrude a one-inch bead of adhesive to purge any air from the cartridge tip, then immediately replace the cartridge cap tightly, while the adhesive is hot. ALWAYS WEAR GLOVES.
Not for use on copper or metal alloys containing a high percentage of copper. Not for continuous submersion or use below the waterline.
Caution StatementsWARNING: Toxic material. Eye and skin irritant. May cause skin and lung sensitization. Caution: Contact with heated product may cause thermal burns. Always wear gloves.
Contains isocyanates. Avoid prolonged or repeated contact with skin or vapors. Do not swallow. May be harmful if swallowed. Avoid contact with eyes. First Aid:
If swallowed, do not induce vomiting. Call physician immediately. If eye contact occurs, flush eyes with water for 15 minutes and call physician. In case of skin contact, wash skin with soap and water. Contact physician if irritation or sensitization occurs (difficult to remove cured product from skin). If inhaled, move to fresh air and contact physician. Refer to Material Safety Data Sheet for additional safety information or call 1-800-347-4583.KEEP OUT OF THE REACH OF CHILDREN.
|Part No.||Size||Weight||UPC||Case UPC||Units Per Package||Packages Per Pallet
|Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583