Titebond Solvent Based FRP

Titebond Solvent-Based FRP Adhesive is a versatile, high-quality adhesive designed for the installation of plywood, tileboard, FRP, pre-finished hardboard, gypsum wallboard and other paneling materials. It exceeds the ASTM C557 specification.

Titebond Solvent-Based FRP Adhesive provides excellent water-resistance and remains permanently flexible. It is easy to trowel and offers a 30-minute working time to allow precise placement of the working materials.

Product Features

Physical Properties

Type Synthetic elastomeric polymer and resins Reactive VOC 247 g/L
State Light viscosity mastic Weight Per Gallon 10.6 lbs.
Color Tan Flashpoint Less than 0°F.
Solids 80% Freeze/thaw Stability Will not freeze
Viscosity 120,000 cps Storage Life 24 months in tightly closed containers at 75°F.

50 sq. ft. per gallon

Application Guidelines

Application Temperature Above 50°F. for adhesive and substrates

Working Time 30 minutes (70°F./50%RH)

Method of Application Trowel or cartridge/caulking gun (Certain in-plant applications might also utilize extrusion.) Cutting, piecing and trimming should be done before applying mastic. Apply mastic to back of panel being installed. In trowel applications, a notched spreader with notches at least 3/16" wide,1/4" deep,1/2" center to center is recommended to insure adequate coverage. Maintain proper notch size by cleaning spreader frequently and by filing notches to proper depths after wear. (Too little adhesive will result in a poor bond.) For cartridge application, apply continuous bead around perimeter and 12" centers. Warped panels or out-of-plumb wall surfaces may have to be shored or braced for 6 to 8 hours until the adhesive has acquired initial set. NOTE: If panels are subjected to large temperature changes, a troweled application is recommended.

Cleanup Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor’s precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not affect the surface being cleaned.

FRP Installation Guide


Not designed for continuous submersion. Do not adhere one non porous material to another as this will slow or prevent drying.

Caution Statements

DANGER:EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains hexane. Keep away from heat, sparks & flame. Use only with positive cross-ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can cause eye or skin irritation. Prolonged or repeated overexposure to solvent in uncured product can cause central nervous system, eye, skin or respiratory system effects. First Aid: If dizziness or other adverse effects are experienced, move to fresh air; contact physician if discomfort persists. If swallowed, do not induce vomiting; contact physician immediately. If eye contact occurs, flush with water for 15 minutes; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Safety Data Sheet.KEEP OUT OF THE REACH OF CHILDREN. WARNING: This product contains small amounts of toluene, a chemical known to the State of California to cause birth defects or other reproductive harm.

Ordering Information

Part No.SizeWeightUPCCase UPCUnits Per PackagePackages Per Pallet
32275 Gallon Pail57.17037083032277 136

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
Franklin International