PROvantage Interior & Exterior Wood Projects Adhesive

PROvantage Interior & Exterior Wood Projects Adhesive is specifically engineered for interior/exterior wood construction and repair projects. This premium grade, waterproof formula offers superior bond strength and cold weather extrusion, down to 0°F. It is ideal for bonding most common wood-based materials including trim, molding, paneling, plywood, OSB, particleboard and wet, frozen and treated lumber. Wood Projects Adhesive can bridge material gaps up to 3/8", remains permanently flexible and offers greater bond strength than fasteners alone. It combines performance and regulatory compliance — it exceeds the AFG-01 and ASTM D3498 specifications and meets today’s most stringent VOC regulations. Exceeds the requirements of APA’s AFG-01, ASTM D3498 and ASTM C557.

Product Features

• Waterproof
• Permanent bond
• VOC-compliant
• Interior & exterior
• Wood paneling & molding
• Stronger than fasteners alone

Physical Properties

Type Proprietary synthetic polymer	Non-reactive VOC 49 g/L
State Thixotropic medium viscosity mastic	Weight/gallon 10.6 lbs.
Color Light beige	Flashpoint < 0°F
Solids 67%	Freeze/thaw stability Will not freeze
Viscosity 150,000 cps	Storage life 18 months in tightly closed containers at 75°F

Coverage (maximum): Approximate length of bead according to bead diameter

Container	1/8” bead	1/4” bead	3/8” bead
10 oz. Cartridge	123 ft.	30 ft.	13 ft.

Application Guidelines

Application Temperature 0°F to 100°F

Service Temperature Range -20°F to 120°F

Method of Application Cartridge/caulking gun

Working Time Approximately 20 minutes for a 1/4” bead

Working Surfaces Surfaces to be bonded should be clean, dry and free from excessive oil, grease, water, dirt or any other material that may deter adhesion.

Cleanup Tools/adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendor’s precautions. NOTE: Test solvent on an out-of-the way area to make sure it will not mar or attack the surface.

Limitations

Not designed for continuous submersion. Do not use on vinyl-coated drywall, polystyrene foam, rigid plastics or for wood floor installations. Do not adhere one non porous material to another as this will slow or prevent drying.

Caution Statements

DANGER: EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains methyl acetate, hexane and residual vinyl acetate. Keep away from heat, sparks and flame. Use only with positive cross-ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can cause eye or skin irritation. Prolonged or repeated overexposure to solvents in uncured product can cause central nervous system, peripheral nervous system, eye, skin, liver kidney or respiratory system effects. First Aid: If dizziness or other adverse effects are experienced, move to fresh air; contact physician if discomfort persists. If eye contact occurs, flush eyes with water for 15 minutes; contact physician immediately. If swallowed, do not induce vomiting; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persist. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Ordering Information

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

2020 Bruck Street, Columbus, Ohio 43207 CUSTOMER SERVICE 1-800-669-4583 TECH SERVICE 1-800-347-4583 www.titebond.com