Titebond Painter's Caulk
Titebond® Painter's Caulk is an economical, easy-to-use caulk that is formulated for interior and exterior pre-paint preparation. It offers good weather-resistance and provides a strong bond to most common building materials, including wood, metal, glass, masonry, aluminum and brick. It can be used for sealing joints, repairing cracks and back-filling gaps.
Titebond Painter's is de-aired for a smooth, uniform bead that extrudes and tools easily. It is intended for interior use and can be painted with a water-based interior paint with one coat and will not bleed through the paint. Titebond Painters is a non-stringing formula that won’t sag or drool and it has excellent bead cut-off. It also cleans up with soap and water when wet.
- Meets ASTM C-834 Type OP Grade -18°C.
Revised July 2012
- Fills gaps, seals joints and repairs cracks
- Paints easily with one coat
- Dries quickly & provides a tight seal
- Uncured material cleans up with soap and water
- Minimal odor
- De-aired for a smoother bead
- Mildew resistant
Non-reactive VOC 23 g/L (<1.5%)
Weight/gallon 13.5 lbs.
Viscosity 600,000 cps
Storage life 24 months in tightly closed containers at 50°F to 80°F.
Freeze/thaw stability Stable
Coverage (maximum): Approximate length of bead according to bead diameter:
| 10.1 oz. Cartridge
Above 40°F. and below 120°F.
Service Temperature Range
-25°F. to 180°F.
Method of Application
Approximately 10-15 minutes for 1/4” bead
Surfaces must be cleaned down to the original substrate, dry and free from oil, grease, water, dirt or any other material that may prevent adhesion.
Clean excess material with a damp cloth. Clean hands and tools with soap and water. Scrape dried excess.
Titebond Painter's Caulk should be dry to the touch and ready to paint in 2-4 hours. Dry time may be extended in humid or cold conditions. It is not designed for continuous submersion or use below the waterline. For questions, please call our toll free Help Line 1-800-347-4583 or visit us at titebond.com.
Caution StatementsWARNING: EYE, SKIN AND RESPIRATORY IRRITANT.
Contains acrylic polymer, limestone, titanium dioxide, ethylene glycol and mineral derivatives. Harmful if swallowed. Long term exposure to ingredients in this product can increase the risk of certain cancers. Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Wear appropriate personal protective equipment. First Aid:
If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes; contact physician. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
|Part No.||Size||Weight||UPC||Case UPC||Units Per Package||Packages Per Pallet
|7301||10.1 Oz. Cartridge - White||15.01||037083073010||10037083073017||12||108
|Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583