WEATHERMASTER ULTIMATE MULTI-PURPOSE SEALANT

Titebond WeatherMaster Ultimate Multi-Purpose Sealant is a premium-grade, superior polymer, multipurpose exterior sealant that offers unbeatable adhesion to most common building materials. It is specifically formulated to outperform all other sealant technologies, including VOC solvent, silicones, tripolymers and urethanes. It can be extruded in extreme temperatures, remains permanently flexible with no shrinkage, adheres well to damp surfaces and provides a weather-tight seal against water, wind, dust and dirt.

Exclusively available on Lowes.com and in select Lowe's stores.

Features & Benefits

  • IDEAL FOR: Exterior applications like: windows, doors, shutters, exterior trim, metal/vinyl siding, gutters, vents, RVs, metal roofs, tractor trailers and buses.
  • SEALS: PVC, wood, concrete, masonry, stucco, wall panels, vinyl, glass, fiberglass, plastic, siding, flashing, sheet metal, Kynar™ coated metals, aluminum, galvanized steel, copper and most common building materials.
  • Outperforms silicone, tripolymer and urethane sealants
  • Applies in extreme weather conditions
  • Joint movement capability ± 50%
  • UV-resistant and VOC-compliant
  • Compatible with all types of foam
  • Permanently flexible - Will not crack

SPECIFICATIONS

Exceeds:
  • ASTM C920 Type S Grade NS Class 50 Use NT, M, A & G
  • Federal Specification TT-S-00230C Type II Class A
Meets the requirements of:
  • CAN/CGSB-19 13-M87 Classification MCG-2-25-A-N
USDA COMPLIANT

Application Guidelines

  • Application Temperature: Above 0°F (-18°C)
  • Service Temperature Range: -75°F to 212°F (-59°C to 100°C)
  • Method of Application: Cartridge/caulking gun, bulk/sausage gun
  • Tooling Time: For a 1/4” bead, approximately 10-15 minutes, depending on temperature and humidity.
  • Application Directions: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. 2. Remove nozzle, cut tip of the nub and puncture inner foil seal. 3. Screw nozzle onto cartridge and cut tip on slant for 1/4" to 3/8" bead and place in cartridge gun. 4. Force sealant into clean joint. Always apply sealant in bead form. To ensure neat sealant lines, mask areas adjacent to joints. Once sealant is dry to the touch and does not transfer, remove masking tape. No tooling is required. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
  • Substrate Compatibility: Excellent adhesion to Kynar™ coated materials. For use on polycarbonate, check with polycarbonate supplier on compatibility. Do not apply Metal Roof Translucent to polycarbonate due to solvent cracking. For questions, please call our Help Line at 1-800-347-4583.
  • Painting: Sealant is intended for exterior use. If used indoors, sealant may need to be painted. Painting may occur one hour after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended.
  • Cleanup: Clean uncured material with acetone or isopropyl alcohol. After curing, excess sealant must be cut or scraped away. Follow solvent vendor’s precautions when using solvents.
  • Coverage:
    Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
    9.5 oz. Cartridge 116 ft. 29 ft. 13 ft. 7 ft.

Physical Properties

  • Type: Elastomeric superior polymer
  • Reactive VOC: <50 g/L (<2%)
  • Reactive VOC: 100%
  • Viscosity: 102,000 cps.
  • Weight Per Gallon: 11.7 lbs.
  • Freeze / Thaw Stability: Stable
  • Flashpoint: Solvent free/Not applicable
  • Storage Life: 24 months in a dry location at or below 75°F

Limitations

Not designed for continuous submersion or use below the waterline. Air, sealant and surface temperature should be above 0°F. Copper should be coated to eliminate oxidation before sealing. Sealant is intended for exterior use. If used indoors, sealant may need to be painted. Painting may occur one hour after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended. Once sealant is applied, do not wipe with solvents. DO NOT TOOL – DO NOT SMEAR. It is highly recommended to use backing material. Application of sealant at high temperatures may cause the sealant to sag in some applications. Check with poly-carbonate supplier on compatibility. Sealant releases methanol during cure, check with substrate manufacturer for compatibility. For best results, store in a dry location at or below 75°F.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per PalletColor
31001037083310016100370833100139.5 Oz. Cartridge - White13.0812108

Warranty Statement

Liability is limited to product replacement only.
Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com

Franklin International