GREENCHOICE SUBFLOOR CONSTRUCTION ADHESIVE

Titebond GREENchoice Subfloor Construction Adhesive is a professional strength formula that is specifically designed for subfloor installations and general plywood use. It provides a permanent bond that remains flexible, reduces nailing and helps prevent squeaky floors. The VOC-compliant, nonflammable formula is environmentally safe – emitting no harmful fumes and promoting healthy living and working environments.

Features & Benefits


  • Recommended For: Subfloor installations, general plywood use, as well as filling gaps and irregularities in the subfloor.
  • Compatible Materials: Common building materials including wood, engineered lumber, particleboard, OSB and wet, frozen and treated lumber.
  • All Weather 20°F - 120°F
  • Water-based
  • Environmentally safe
  • Fills gaps and irregularities
  • Highly water-resistant when dry
  • Excellent aging qualities
  • Offers freeze/thaw stability
  • Cleans easily with water in wet state
  • Cartridge and carton contain post-consumer recycled material
  • Reduces nailing
  • Excellent strength
  • VOC-compliant

Specifications & Certifications

  • Exceeds APA AFG-01 and ASTM C557.

Application Guidelines


  • Application Temperature: 20°F to 100°F
  • Service Temperature Range: 0°F to 120°F
  • Working Time: Approximately 20 minutes for a 1/4" bead
  • Prep: Surfaces must be clean and free of any material that may prevent adequate adhesion.
  • Application: Cut tip straight across for 1/4” to 3/8” bead. Puncture inner seal and place in cartridge gun. Apply adhesive to each furring strip, stud or floor joist to be covered. Adhere materials within 15 minutes or before skinning of adhesive occurs. Position material to be bonded and press firmly for full contact with adhesive. Note: For subfloors, apply adhesive to joists for one sheet at a time. Nail or screw each sheet as recommended by the American Plywood Association.
  • Cleanup: Tools and adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesive may be cleaned with water/acetone/vinegar mixture. Follow solvent vendor’s precautions.

Coverage

Size1/8” Bead1/4" Bead3/8" Bead1/2" Bead
28 Oz. Cartridge355 ft.86 ft.39 ft.21 ft.


Physical Properties


  • Type: Blend of polymer emulsions
  • Color: Off white
  • State: Medium-viscosity mastic
  • Solids: 67.5%
  • Viscosity: 82,500 cps
  • pH : 7.5
  • VOC: < 50 g/L
  • Weight Per Gallon: 10.64 lbs.
  • Flashpoint: > 200°F
  • Freeze/thaw Stability: Stable
  • Storage Life: 18 months in an unopened container

Limitations


Not designed for continuous submersion or for use on plastics or polyethylene foams. Do not adhere one non-porous material to another as this will slow or prevent drying.

Product SKUs


Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per Pallet
41220370830412241003708304122128 Oz. Cartridge30.021244
412852 Gallon Drum566.0614

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com

Franklin International