 |
|
|
|
Physical Properties (Typical) |
|
| TypeAdvanced Proprietary Polymer |
|
Calculated VOC: 5.6 g/L |
| StateLiquid |
|
Weight/gallon9.22 lbs |
| ColorTan |
|
Chalk temperature*Approx. 47°F |
| Dried filmLight brown |
|
Flashpoint>200°F. |
| Solids52% |
|
Freeze/thaw stabilityStable |
| Viscosity4,200 cps |
|
pH2.5 |
| Storage life12 months in tightly closed containers below 75°F. |
|
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
|
|
|
|
Application Guidelines |
|
Application temperatureAbove 47°F.
Open assembly time10 minutes (70°F./50%RH)
Total assembly time20-25minutes (70°F./50%RH)
Minimum required spreadApproximately 6 mils or 250 square feet per gallon
Required clamping pressure Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Methods of application Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.
Patent Pending
|
|
|
|
Bond Strength ASTM D-905
(On Hard Maple) |
|
| Temperature |
Strength psi |
% Wood Failure |
|
| Room Temperature |
4000 |
57 |
| |
|
|
|
|
|
|
Product Features |
|
Passes ANSI/HPVA Type I water-resistance
Waterproof formula that cleans up with water
Superior strength - Strong initial tack
Designed for interior and exterior applications
Longer open assembly time
Lower application temperature
Unaffected by finishes
FDA approved for indirect food contact
|
|
|
|
Limitations |
|
Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 45°F. Store product below 75°F. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN. |
|
|
|
Caution Statement |
|
No caution information is needed. Please refer to the Material Safety Data Sheet for further information. |
|
|
|
Ordering Information |
|
| Cat. No. |
Size |
Units per
Package |
Weight |
Packages
per Pallet |
|
| 1411 |
1.25 oz. Bottle |
50 |
60 |
160 |
| 1412 |
4 oz. Bottle |
12 |
5 |
270 |
| 1413 |
8 oz. Bottle |
12 |
8 |
160 |
| 1414 |
16 oz. Bottle |
12 |
16 |
100 |
| 1415 |
Quart Bottle |
6 |
16 |
88 |
| 1416 |
Gallon Bottle |
2 |
20 |
63 |
| 1417 |
5 Gallon Pail |
1 |
52 |
24 |
| 1418 |
55 Gallon Drum |
1 |
559 |
4 |
|
|
|
|
Important Notice: Our recommendations, if any, for
the use of this product are based on tests believed to be reliable. Since the use of this product is beyond
the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or
effects incidental to such use, handling or possession or the results to be obtained, whether in accordance
with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore.
Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict
with existing laws and/or patents covering any material or use. |
©1999 Franklin International