 |
|
|
|
Physical Properties (Typical) |
|
| TypePolyurethane |
|
Calculated VOC 20 g/L |
| State Mastic |
|
Weight/gallon 13.4 lbs. |
| Color Brown/green |
|
Flashpoint >200 °F |
| Solids 98% |
|
Freeze/thaw stability Will not freeze |
| Viscosity100,000 cps. |
|
Storage Life 12 months in unopenend container |
|
|
|
|
Application Guidelines |
|
Application temperature 32 °F. to 120 °F.
Service temperatures-20°F. to 120°F.
Method of application Cartridge/caulking gun
Coverage (maximum)Approximate length of bead according to bead diameter:
Container |
1/8" bead |
1/4" bead |
3/8" bead |
|
| 10.5 oz. Cartridge |
129 ft. |
32 ft. |
14 ft. |
| 29 oz. Cartridge |
355 ft. |
89 ft. |
39 ft. |
Working time Approximatety1 hour - depending on humidity
Working surfaces Surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Apply Titebond Premium Polyurethane Construction Adhesive to only one of the surfaces to be bonded. NOTE: When bonding subfloors or wet, frozen and treated lumber, nail or screw each sheet as recommended by the American Plywood Association.
CleanupScrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
|
|
|
|
Product Features |
|
Environmentally safe - VOC-compliant
Advanced urethane formula
Ideal for use on wet, frozen, treated and engineered lumber
Unmatched strength and durability
Can be used to bond non-porous materials
Works in near freezing temperatures
Safe for plastic or foam
Fast initial grab - Smooth bead - Fast cure - Minimal shrinkage
Post-consumer recycled cartridge and carton
| Exceeds the requirements of the APA''''s AFG-01, ASTM D3498, ASTM C557, CAN/CGSB-71.26M and C. |
|
|
|
|
Limitations |
|
GREENchoice Premium Polyurethane is not designed for continuous submersion. Adhesive can be difficult to remove from skin and clothing. It is recommended that gloves be worn. When using on non-porous substrates, mist with water to speed curing. |
|
|
|
Caution Statement |
|
WARNING: EYE AND SKIN IRRITANT. Potential skin and respiratory sensitizer. Contains isocyanates containing polymers. Avoid prolonged or repeated contact with skin or vapors. Do not allow eye contact. Use only with adequate ventilation. First Aid: If skin contact occurs, wash affected area with soap and water. If irritation persists or allergic reactions develop, contact physician. If adverse respiratory affects occur, remove individual to fresh air and contact physician. If eye contact occurs, flush eyes with water for 15 minutes; contact physician. If swallowed, do not induce vomiting; contact physician. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
|
|
|
|
Ordering Information |
|
| Cat. No. |
Size |
Units per
Package |
Weight |
Packages
per Pallet |
|
| 4221 |
10.5 oz. Cartridge |
12 |
14 |
108 |
| 4222 |
29 oz. Cartridge |
12 |
39 |
38 |
|
|
|
|
Important Notice: Our recommendations, if any, for
the use of this product are based on tests believed to be reliable. Since the use of this product is beyond
the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or
effects incidental to such use, handling or possession or the results to be obtained, whether in accordance
with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore.
Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict
with existing laws and/or patents covering any material or use. |
©1999 Franklin International