Landscape Retaining Wall Landscape Retaining Wall

Titebond Landscape Retaining Wall Adhesive is a professional strength adhesive for use on retaining and landscape decorative wall systems. It is specifically formulated for use with concrete, wood, brick, masonry, pavers and most other common landscaping materials.

Titebond Landscape Retaining Wall Adhesive works well on dry, damp, and cold surfaces to provide a long lasting bond. It is strong enough to resist water and frost.
MSDS
3131 - 10.5 oz Cartridge
3132 - 29 oz. Cartridge
 
 
 
 
 
 
 
 
MSDS
View PDF
Download Adobe Acrobat

Physical Properties (Typical)
Type Synthetic elastomeric polymer Calculated VOC (less exempt solvent):282 g/L
State Medium-viscosity mastic Weight/gallon 9.0 lbs .
Color Light tan Flashpoint Less than 0 °F.
Solids 65% Freeze/thaw stability Stable
Viscosity 130,000 cps Storage life 12 months in tightly closed containersat 75 °F.
Application Guidelines Application temperature 0 °F.to 100 °F.
Service temperatures -20 °F.to 120 °F.
Method of application Cartridge/caulking gun
Coverage (maximum) Approximate length of bead according to bead diameter:

Container

 1/8" bead                   1/4" bead                   3/8" bead                
10.5 oz. Cartridge                   129 ft. 32 ft. 14 ft.
29 oz. Cartridge 355 ft. 89 ft. 39 ft.

Working time Approximately 10-20 minutes for a 1/4" bead
Working surfaces Surfaces to be bonded should be clean, dry and free from any material that may deter adhesion.
CleanupScrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents.
Product Features
  • Retaining blocks and pavers
  • Metal, brick and concrete
  • Wet and frozen lumber
  • Waterproof
  • Works well in extreme temperatures
  • Superior strength and stability
    • Limitations Titebond Landscape Retaining Wall Adhesive is not designed for continuous submersion or for use on
    polystyrene or polyethylene foams.
    Caution Statement DANGER: EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains acetone, hexane and toluene. Keep away from heat, sparks and flame. Use only with positive cross ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can cause eye or skin irritation. Prolonged or repeated overexposure to solvents in uncured product can cause central nervous system, peripheral nervous system, eye, skin, liver, kidney or respiratory system effects. First Aid: If dizziness or other adverse effects are experienced, move to fresh air; call physician if discomfort persists. If eye contact occurs, flush eyes with water for 15 minutes; contact physician immediately. If swallowed, do not induce vomiting; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
    WARNING:     This product contains toluene, a chemical known to the State of California to cause birth defects or other reproductive harm.
    Ordering Information
    Cat. No. Size Units per
    Package    		 Weight Packages
    per Pallet
    3131 10.5 oz Cartridge 12 11 108
    3132 29 oz. Cartridge 12 27 38
    Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.


    Franklin International ©1999 Franklin International Legal Disclaimer Privacy Policy