Clear Pressure Sensitive Clear Pressure Sensitive

Titebond Solvent Free Clear Pressure Sensitive Adhesive is a latex-based, clear thin spread formula for the installation of vinyl, vinyl composition and ashphalt tiles, as well as foam-backed hardwood parquet tiles. It combines a fast tack with a long open time.

Titebond Solvent Free is environmentally superior and contains no ozone-depleting chemicals. It is nonflammable, emits no harmful fumes and cleans up with water.
MSDS
5124 - 4 Gallon Pail
5126 - Gallon Can
 
 
 
 
 
 
 
 
MSDS
View PDF
Download Adobe Acrobat

Physical Properties (Typical)
Type Latex Calculated VOC (less water)16.2 g/L
State Low viscosity mastic Weight/gallon 9.2 lbs.
Color Beige Flashpoint >200°F.
Solids 65% Freeze/thaw stability Stable (5 cycles @20 °F.)
Viscosity Roller, trowel, spray grade Storage life 12 months in tightly closed containers at 75°F.
Application Guidelines Application temperature Above 65°F. for adhesive and substrates
Service temperatures 40°F. to 120°F.
Method of applicationAirless mastic spray gun, roller, trowel or brush. For smooth surfaces, use a
1/32" U-notch trowel. For rough surfaces, use a 1/16" square-notch trowel.
Coverage 1/32" U-notch trowel- approximately 250 sq. ft. per gallon
1/16" square-notch trowel- approximately 50-75 sq. ft. per gallon
Spray, roller or brush- approximately 125-150 sq. ft. per gallon
Working time72 hours maximum
Working surfaces Surface must be dry and free of any material that may deter adhesion. Cut and fit all material before applying adhesive. Apply adhesive. Adhesive is ready when it becomes nearly clear and no longer transfers to the finger when lightly touched. Set tiles in place carefully because they will not slide. Roll within 12 hours. Allow adhesive to dry well before exposing installations to cleaning water.
Cleanup Clean tools and excess adhesive with water while wet. If adhesive has dried, use mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent in an out-of-the-way area to make sure it will not mar or attack the surface.
Product Features
  • Ideal for paper and felt backed vinyl, vinyl composition and carpet tiles
  • Quick grab - Strong bond
  • Water-resistant - Freeze/thaw stable
  • Environmentally safe - Nonflammable
    • Limitations Do not use directly over or under solid vinyl tile or sheet goods. Remove old vinyl flooring before laying new floor. Keep from freezing. Subfloor and materials should be at least 65°F. for 24 hours before and after installation.
    Caution Statement CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye and skin contact areas persists, contact physician. For additional information, refer to Material Safety Data Sheet.
    KEEP OUT OF THE REACH OF CHILDREN.
    Ordering Information
    Cat. No. Size Units per
    Package    		 Weight Packages
    per Pallet
    5124 4 Gallon Pail 1 40 36
    5126 Gallon Can 2 20 75
    Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.


    Franklin International ©1999 Franklin International Legal Disclaimer Privacy Policy