 |
|
|
|
Physical Properties (Typical) |
|
| Type Polymer emulsion |
|
Calculated VOC: 3.0 g/L |
| State Medium-viscosity mastic |
|
Weight/gallon 11.9 lbs. |
| Color Beige |
|
Flashpoint >200°F. |
| Solids 70% |
|
Freeze/thaw stability Stable |
| Viscosity 200,000 cps |
|
pH 5.0 |
| Storage life More than 2 years in unopened container |
|
|
|
|
|
Application Guidelines |
|
Application temperature Over 50°F. for adhesive and substrates
Service temperatures 0°F. to 120°F.
Method of application Mason’s trowel
Working surfaces Surfaces must be dry and free from any material that may deter adhesion. Using the "butter" method, spread a thin layer of adhesive to cover a large area of each corner of the tile. Then apply adhesive in 1"to 1 1/2"mounds (golf ball size). Place mounds 2-3 inches in from the corners on the back of the tile. Immediately press tile into position, working the tile back and forth 1/2" to flatten the mounds of adhesive. Adhesive must be flattened to a mound 3/16" to 3/8" thick and 2 1/2" in diameter. When installing interlocking tile, do not slide tile into groove of adjacent tile until it has been positioned to ts proper level.
Cleanup Tools and excess adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesive may be cleaned with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
Coverage 50-60 sq. ft. of ceiling tile per gallon.
|
|
|
|
Product Features |
|
For use on acoustical ceiling tiles
Fast grab - Excellent adhesion
"No sag" installation
Water cleanup
Passes ASTM D-1779 specification
NPFA Class A fire rating when tested in accordance with ASTM E-84
|
|
|
|
Limitations |
|
Not recommended for use on tiles larger than 12" x 12". For best results, store Titebond Solvent Free Acoustical Ceiling Tile Adhesive above 50°F. Do not store product outside if temperature is below 50°F. Product must be stored inside a climate controlled area that is above 50°F. For further questions about applications that are not covered here, please call Tech Service at 1-800-347-GLUE (4583). |
|
|
|
Caution Statement |
|
CAUTION: EYE AND SKIN IRRITANT. Contains ethylene glycol. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact areas persists, contact physician. For additional information, refer to Material Safety Data Sheet.
KEEP OUT OF THE REACH OF CHILDREN. |
|
|
|
Ordering Information |
|
| Cat. No. |
Size |
Units per
Package |
Weight |
Packages
per Pallet |
|
| 2704 |
4 Gallon Pail |
1 |
51 |
36 |
| 2706 |
Gallon Can |
2 |
26 |
75 |
|
|
|
|
Important Notice: Our recommendations, if any, for
the use of this product are based on tests believed to be reliable. Since the use of this product is beyond
the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or
effects incidental to such use, handling or possession or the results to be obtained, whether in accordance
with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore.
Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict
with existing laws and/or patents covering any material or use. |
©1999 Franklin International