 |
|
|
|
Physical Properties (Typical) |
|
| Type Aliphatic Hydrocarbon/Polychloroprene Rubber |
|
Calculated VOC: 720 g/L |
| State Liquid |
|
Weight/gallon 7.4 lbs. |
| Color Light Tan |
|
Flashpoint >20°F. |
| Solids 13% |
|
Freeze/thaw stability Will not freeze |
| Viscosity 1400 cps |
|
Storage life 12 months in tightly closed containers at 75°F. |
|
|
|
|
Application Guidelines |
|
Application temperature 40°F. to 100°F.
Service temperatures -20°F. to 220°F.
Method of application Brush or roller
Coverage150-200 sq. ft. per gallon on single surface coverage; 75-100 sq. ft. per gallon for bonded surfaces
Working time 2 hours maximum
Working surfaces Surface must be dry and free of any material that may deter adhesion. Cut and fit all materials before applying adhesive. Apply a liberal coat of adhesive to both surfaces. Allow adhesive to dry before bonding surfaces. Position surfaces carefully before assembly because bonding is immediate upon contact. If surfaces do not bond immediately, the adhesive has been allowed to dry too long or not enough cement was used. In either case, repeat application. After assembly, roll with a 3" wide roller. Trim and finish can be started immediately after bonding.
Cleanup Brushes and tools may be cleaned with mineral spirits or equivalent solvent. Follow solvent vendor’s precautions when using solvents. NOTE: Test solvent in an out-of-the-way
area to make sure it will not mar or attack the surface.
|
|
|
|
Product Features |
|
Ideal for plastic laminates and veneers
Professional strength - No clamping required
Highly water and heat-resistant
|
|
|
|
Limitations |
|
Do not use materials made with copper or copper alloys to store or apply Titebond Fast Dry Contact Cement. Do not laminate materials made from copper or copper alloys with this adhesive. Do not use on polystyrene foams. |
|
|
|
Caution Statement |
|
DANGER: FLAMMABLE. VAPOR HARMFUL. VAPORS MAY CAUSE FLASH FIRE. Contains toluene, alpihatic hydrocarbons and ethyl acetate. Keep away from heat, sparks and flame. Use only with positive cross-ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can cause eye or skin irritation. Prolonged or repeated overexposure to solvents in uncured product can cause central nervous system, peripheral nervous system, eye, skin, liver, kidney or respiratory system effects. First Aid: If dizziness or other adverse health effects are experienced, move to fresh air; contact physician if discomfort persists. If eye contact occurs, flush with water for 15 minutes; contact physician immediately. If swallowed, do not induce vomiting; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Material Safety Data Sheet.
KEEP OUT OF THE REACH OF CHILDREN.
WARNING: This product contains toluene, a chemical known to the State of California to cause birth defects or other reproductive harm.. |
|
|
|
Ordering Information |
|
| Cat. No. |
Size |
Units per
Package |
Weight |
Packages
per Pallet |
|
| 5185 |
Quart Can |
6 |
13 |
112 |
| 5186 |
Gallon Can |
2 |
16 |
90 |
|
|
|
|
Important Notice: Our recommendations, if any, for
the use of this product are based on tests believed to be reliable. Since the use of this product is beyond
the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or
effects incidental to such use, handling or possession or the results to be obtained, whether in accordance
with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore.
Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict
with existing laws and/or patents covering any material or use. |
©1999 Franklin International