 |
|
|
|
Physical Properties (Typical) |
|
| Type Latex Emulsion |
|
Calculated VOC (less water): 0.2 g/L |
| State Medium viscosity paste |
|
Weight/gallon 15.0 lbs. |
| Color White |
|
Flashpoint >200°F. |
| Solids 80% |
|
Freeze/thaw stability Stable |
| Viscosity 140,000 cps |
|
Storage life 12 months in tightly closed containers at 75°F. |
|
|
|
|
Application Guidelines |
|
Application temperature Above 50°F. for adhesive and substrates
Service temperatures 0°F. to 120°F.
Method of application Use a 5/32" V-notch trowel for setting standard wall tile and ceramic and mosaic floor tile. For larger ceramic, vitreous and quarry tiles, use a 1/4" x 1/4" x 1/4" square-notch trowel.
Coverage 35 sq. ft. per gallon using a V-notch trowel; 20 sq. ft. per gallon using a square-notch trowel
Working time 30-40 minutes
Working surfaces Surface must be dry and free of any material that may deter adhesion. Score all painted surfaces.All tiling materials,room and adhesive should be above 50°F. for 24 hours before, and 48 hours after, installation. Apply adhesive to substrate using recommended trowel. Apply tiles within 30-40 minutes after spreading adhesive. Press tiles onto adhesive with a slight twisting motion. Beat in tiles with a rubber-faced beating block to assure complete contact with adhesive and to eliminate air bubbles. Tiles may be grouted in 24-48 hours.
CleanupUse warm, soapy water to clean wet adhesive from face of tile and tools. Remove dried adhesive with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent in an out-of-the-way area to make sure it will not mar or attack the surface.
|
|
|
|
Product Features |
|
Ideal for ceramic and mosaic tile
Excellent water-resistance
Quick grab - Superior strength
Passes ANSI A136.1 Types I & II
|
|
|
|
Limitations |
|
Not for exterior use. Do not use for setting fixtures on marble. Do not use over surfaces such as tempered hardboard, pressboard, epoxy terrazo and synthetic flooring (linoleum,asphalt and vinyl tile). Do not use for underwater applications or where excessive moisture exists. Do not use for floor applications of tiles larger than 8" x 8" or with lugs. |
|
|
|
Caution Statement |
|
CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician immediately. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact areas persists, contact physician. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN. |
|
|
|
Ordering Information |
|
| Cat. No. |
Size |
Units per
Package |
Weight |
Packages
per Pallet |
|
| 5535 |
Quart Can |
6 |
25 |
112 |
| 5536 |
Gallon Can |
2 |
32 |
75 |
| 5539 |
3.5 Gallon Pail |
1 |
55 |
36 |
|
|
|
|
Important Notice: Our recommendations, if any, for
the use of this product are based on tests believed to be reliable. Since the use of this product is beyond
the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or
effects incidental to such use, handling or possession or the results to be obtained, whether in accordance
with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore.
Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict
with existing laws and/or patents covering any material or use. |
©1999 Franklin International