 |
|
|
|
Physical Properties (Typical) |
|
| Type Synthetic elastomeric polymer |
|
Calculated VOC: 365 g/L |
| State Medium-viscosity mastic |
|
Weight/gallon 9.9 lbs. |
| Color Tan |
|
Flashpoint <0°F. |
| Solids 69% |
|
Freeze/thaw stability Will not freeze |
| Viscosity 200,000 cps |
|
Storage life 12 months in tightly closed containers at 75°F. |
|
|
|
|
Application Guidelines |
|
Application temperature 40°F. to 100°F.
Service temperatures 0°F. to 150°F.
Method of application Cartridge/caulking gun
Coverage (maximum) Approximate length of bead according to bead diameter:
Container |
1/8" bead |
1/4" bead |
3/8" bead |
|
| 29 oz. Cartridge |
355 ft. |
89 ft. |
39 ft. |
Working time Approximately 20 minutes for a 1/4" bead
Working surfaces Surfaces to be bonded should be clean, dry and free from excessive oil, grease, water, dirt or any other material that may deter adhesion.
Cleanup Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor ’s precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
|
|
|
|
Product Features |
|
Ideal for plywood, hardboard, gypsum wallboard, some steel and aluminum
Strong initial tack allows panels to be positioned quickly without slipping
Resists aging - Will not become hard or brittle
Exposure to moisture or intermittent cold water has little effect on bond
Fills irregularities between materials to provide a more solid backup surface
Exceeds the ASTM C557 specification
Exceeds the performance requirements of CAN/CGSB-71.25 specification
|
|
|
|
Limitations |
|
Do not use on polystyrene foam or rigid plastics such as A.B.S. or high-impact polystyrene. Do not use on vinyl-coated drywall. Use Titebond Interior/Exterior Construction Adhesive for bonding polystyrene or rigid plastics. Do not adhere one non-porous material to another since this will slow or prevent drying. |
|
|
|
Caution Statement |
|
DANGER: EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains hexane and toluene. Keep away from heat, sparks & flame. Use only with positive cross-ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can cause eye or skin irritation. Prolonged or repeated overexposure to solvents in uncured product can cause central nervous system, peripheral nervous system, eye, skin or respiratory system effects. First Aid: If dizziness or other adverse health effects are experienced, move to fresh air; contact physician if discomfort persists. If eye contact occurs, flush eyes with water for 15 minutes; contact physician immediately. If swallowed, do not induce vomiting; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
WARNING: This product contains toluene, a chemical known to the state of California to cause birth defects or other reproductive harm. |
|
|
|
Ordering Information |
|
| Cat. No. |
Size |
Units per
Package |
Weight |
Packages
per Pallet |
|
| 5352 |
29 oz. Cartridge |
12 |
29 |
38 |
|
|
|
|
Important Notice: Our recommendations, if any, for
the use of this product are based on tests believed to be reliable. Since the use of this product is beyond
the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or
effects incidental to such use, handling or possession or the results to be obtained, whether in accordance
with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore.
Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict
with existing laws and/or patents covering any material or use. |
©1999 Franklin International