 |
|
|
|
Physical Properties (Typical) |
|
| Type Synthetic elastomeric polymer |
|
Calculated VOC 310 g/L |
| State Medium-viscosity mastic |
|
Weight/gallon 10.0 lbs. |
| Color Tan |
|
Flashpoint Less than 0°F. (closed cup) |
| Solids 75% |
|
Freeze/thaw stability Will not freeze |
| Viscosity 154,000 cps |
|
Storage life 12 months in tightly closed containers at 75°F. |
|
|
|
|
Application Guidelines |
|
Application temperature 40°F. to 120°F.
Service temperatures -20°F. to 150°F.
Method of application Cartridge/caulking gun
Coverage (maximum) Approximate length of bead according to bead diameter:
Container |
1/8" bead |
1/4" bead |
3/8" bead |
|
| 10.5 oz. Cartridge |
129 ft. |
32 ft. |
14 ft. |
Working time Approximately 45 minutes for a 1/4"" bead
Working surfaces Surfaces must be clean and free of any material that may deter adhesion. For large-panel applications, apply adhesive to panel perimeter and on 16" centers or a cross pattern to assure maximum adhesion.
Cleanup Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor’s precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
|
|
|
|
Product Features |
|
Will not attack plastics or foams
Excellent water-resistance
Good working time
Fast, strong bond
Excellent for use on a variety of substrates
Meets or exceeds the performance requirements of ASTM C557 and ANSI A136.1
Exceeds the performance requirements of CAN/CGSB-71.25 specification
|
|
|
|
Limitations |
|
Do not apply to polystyrene foam if temperature is greater than 90°F. Do not bond tubkit over ceramic tile or other non-porous substrates since this will slow or prevent drying. Bracing may be necessary to ensure proper bonding. For best results, store Titebond Professional Tub Surround Adhesive above 50°F. |
|
|
|
Caution Statement |
|
DANGER: EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains hexane and isopropyl alcohol. Do not use near heat, sparks or flame. Use only with positive cross ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can cause eye or skin irritation. Prolonged or repeated overexposure to solvent in uncured product can cause central nervous system, peripheral nervous system, eye, skin or respiratory system effects. First Aid: If dizziness or other adverse effects are experienced, move to fresh air; contact physician immediately. If eye contact occurs, flush eyes with water for 15 minutes; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
WARNING: This product contains small amounts of toluene, a chemical known to the State of California to cause birth defects or other reproductive harm. |
|
|
|
Ordering Information |
|
| Cat. No. |
Size |
Units per
Package |
Weight |
Packages
per Pallet |
|
| 5221 |
10.5 oz. Cartridge |
12 |
12 |
108 |
|
|
|
|
Important Notice: Our recommendations, if any, for
the use of this product are based on tests believed to be reliable. Since the use of this product is beyond
the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or
effects incidental to such use, handling or possession or the results to be obtained, whether in accordance
with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore.
Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict
with existing laws and/or patents covering any material or use. |
©1999 Franklin International