 |
|
|
|
Physical Properties (Typical) |
|
| TypeCross-linking polyvinyl acetate |
|
Calculated VOC: 5.5 g/L |
| StateLiquid |
|
Weight/gallon 9.1 lbs. |
| ColorHoney cream |
|
Chalk temperature*Approx. 55°F. |
| Dried filmTranslucent, yellow |
|
Flashpoint >200°F. |
| Solids 48% |
|
Freeze/thaw stability Stable |
| Viscosity 4,000 cps |
|
pH 3.0 |
| Storage life 12 months in tightly closed containers at 75°F. |
|
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
|
|
|
|
Application Guidelines |
|
Application temperatureAbove 55°F.
Open assembly time5 minutes (70°F./50%RH)
Total assembly time10-15 minutes (70°F./50%RH)
Minimum required spreadApproximately 6 mils or 250 square feet per gallon
Required clamping pressure Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Methods of application Plastic bottles for fine applications; glue may also be spread with a
roller spreader or brush.
Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.
|
|
|
|
Bond Strength ASTM D-905
(On Hard Maple) |
|
| Temperature |
Strength psi |
% Wood Failure |
|
| Room Temperature |
3,750 |
72 |
| 150°F. Overnight |
1,750 |
6 |
|
|
|
|
Product Features |
|
First one-part wood glue to pass ANSI Type II water-resistance
Designed for exterior use
Excellent sandability
Unaffected by finishes
Ideal for radio frequency (R-F) and hot press gluing systems
FDA approved for indirect food contact
Easy cleanup with water
|
|
|
|
Limitations |
|
Titebond II Premium Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 55°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN. |
|
|
|
Caution Statement |
|
No caution information is needed. Please refer to the Material Safety Data Sheet for further information. |
|
|
|
Ordering Information |
|
| Cat. No. |
Size |
Units per
Package |
Weight |
Packages
per Pallet |
|
| 5001 |
1.25 oz. Bottle |
50 |
6 |
160 |
| 5002 |
4 oz. Bottle |
12 |
5 |
270 |
| 5003 |
8 oz. Bottle |
12 |
9 |
160 |
| 5004 |
16 oz. Bottle |
12 |
16 |
100 |
| 5005 |
Quart Bottle |
6 |
16 |
88 |
| 5006 |
Gallon Bottle |
2 |
20 |
63 |
| 5007 |
5 Gallon Pail |
1 |
51 |
24 |
| 5008 |
55 Gallon Drum |
1 |
551 |
4 |
|
|
|
|
Important Notice: Our recommendations, if any, for
the use of this product are based on tests believed to be reliable. Since the use of this product is beyond
the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or
effects incidental to such use, handling or possession or the results to be obtained, whether in accordance
with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore.
Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict
with existing laws and/or patents covering any material or use. |
©1999 Franklin International