Cold Press for Veneer Cold Press for Veneer

Titebond Cold Press for Veneer is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials.

Titebond Cold Press offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers.
MSDS
5175 - Quart Bottle
5176 - Gallon Bottle
5177 - 5 Gallon Pail
5178 - 55 Gallon Drum
 
 
 
 
 
 
MSDS
View PDF
Download Adobe Acrobat

Physical Properties (Typical)
Type Polyvinyl acetate emulsion Calculated VOC: 2.0 g/L
State Liquid Weight/gallon 9.2 lbs.
Color Tan Chalk temperature* Approx. 50°F.
Dried film Dark Brown Flashpoint >200°F.
Solids 42.0% Freeze/thaw stability Stable
Viscosity 4,500 cps pH 4.9
Storage life 6 months in tightly closed containers at 70°F.
**Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
Application Guidelines Application temperatureAbove 50°F.
Open assembly time15 minutes (70°F./50% RH)
Total assembly time15-20 minutes (70°F./50%RH)
Minimum required spread Approximately 6 mils or 250 square feet per gallon
Required pressure application 100-250 psi, depending on substrates
Methods of application For most consistent coverage a mechanical spreader is recommended.
Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.
Bond Strength ASTM D-905
(On Hard Maple)
Temperature Strength psi % Wood Failure
Room Temperature 2,508 6
150°F. Overnight 656 0
Product Features
  • Economical alternative to contact cement
  • Formulated to minimize "bleed-through"
  • Moderate speed of set
  • No harmful vapors
  • Safe - nonflammable
  • Limitations Titebond Cold Press for Veneer is specifically designed for veneering and is not suited for other types of assembly applications. Not recommended for exterior use or where moisture is likely. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use.NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.
    Caution Statement No caution information is needed. Please refer to the Material Safety Data Sheet for further information.
    Ordering Information
    Cat. No. Size Units per
    Package
    Weight Packages
    per Pallet
    5175 Quart Bottle 6 16 88
    5176 Gallon Bottle 2 20 63
    5177 5 Gallon Pail 1 49 24
    5178 55 Gallon Drum 1 554 4
    Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.


    Franklin International ©1999 Franklin International Legal Disclaimer Privacy Policy